ZyXEL Communications manual Prestige 2602HWL-D3A Support Notes

Prestige 2602HWL-D3A Support Notes

phone calls to PSTN network if the DSL line is unplugged or SIP account cannot be registered, or relay outgoing calls to IP network when PSTN line is unplugged.

You may set up Call Fallback easily on web GUI: VoIP > Phone > Common

Call Park / Call Pickup

Call Park/Pickup function allows you to place a call on hold first. Then it can be retrieved from another phone in the system.

For example, if you are on an active call at your phone, you can park the call by press *97# + park number. Someone on another phone in the system can then dial the call park number to pick-up the call.

Note: The caller must still pay while the call is parked.

When you park the call, you enter a number of your choice (Up to eight digits), which you must enter again when you pick up the call. If you do not enter the correct number, you cannot pickup the call. This means that only someone who knows the number you have chosen can pick up the call.

You can have more than one call on hold at the same time, but you must give each call a different number.

This example shows you how to configure the Call Park and Call Pickup

151

All contents copyright (c) 2007 ZyXEL Communications Corporation.