ZyXEL Communications 2602HWL-D3A manual Create a filter set in Menu

Prestige 2602HWL-D3A Support Notes

1.The outbound packet type (protocol & port number)

2.The source IP address

Generally, the outbound packets for Web service could be as following:

a. HTTP packet, TCP (06) protocol with port number 80 b. DNS packet, TCP (06) protocol with port number 53 or c. DNS packet, UDP (17) protocol with port number 53

For all workstation on the LAN, the source IP address will be 0.0.0.0. Otherwise, you have to enter an IP Address for the workstation you want to block. See the procedure for configuring this filter below.

oCreate a filter set in Menu 21, e.g., set 1

oCreate three filter rules in Menu 21.1.1, Menu 21.1.2, Menu 21.1.3

Rule 1- block the HTTP packet, TCP (06) protocol with port number 80

Rule 2- block the DNS packet, TCP (06) protocol with port number 53

Rule 3- block the DNS packet, UDP (17) protocol with port number 53 o Apply the filter set in menu 4

1.Create a filter set in Menu 21

	Menu 21 - Filter Set Configuration
Filter		Filter
Set #	Comments	Set #	Comments
------	-----------------	------	-----------------
1	Web Request	7	_______________
2	_______________	8	_______________
3	_______________	9	_______________
4	_______________	10	_______________
5	_______________	11	_______________
6	_______________	12	_______________

Enter Filter Set Number to Configure= 1

Edit Comments=

Press ENTER to Confirm or ESC to Cancel:

47

All contents copyright (c) 2007 ZyXEL Communications Corporation.