Prestige 2602HWL-D3A Support Notes

ras> voice config fxs save 1

Music on hold

This feature allows you to put a call on hold and have the other person hear a piece of audio (music, speech, etc.) you previously recorded.

Application Scenarios:

When one side (A) presses flash or reserve key to put a call on hold, the peer side (B) will receive INVITE packet with zero IP address in SDP to inform there is no need to send RTP out any more (RFC2543) or change the attribute field in SDP to recvonly (RFC3261). Phone A generates pre-recorded music from IVR to phone B directly.

You may configure Music on Hold feature easily on P2602HWL-D3A web GUI: VoIP > SIP > SIP

setting > Advanced

In this graph, Device A has enabled Music on Hold function. Thus when A and B are on a call, and if A holds the call, B will hear the music tone.

158

All contents copyright (c) 2007 ZyXEL Communications Corporation.

Page 158
Image 158
ZyXEL Communications 2602HWL-D3A manual Ras voice config fxs save, Music on hold, Setting Advanced