ZyXEL Communications 2602HWL-D3A Speaking, Volume, Listening, Active, Support, Dialing, Interval

	Prestige 2602HWL-D3A Support Notes
Label	Description
Speaking	Use this field to set the loudness that the Prestige uses for the speech signal
Volume	that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Listening	Use this field to set the loudness that the Prestige uses for the speech signal
Volume	that it receives from the peer device and sends to your phone. -1 is the
	quietest and 1 is the loudest.
G.168 Active	Select this check box to cancel the echo caused by the sound of your voice
	reverberating in the telephone receiver while you talk.
VAD	Select this check box to use Voice Activity Detection (VAD) to reduce the
	bandwidth that a call uses. The Prestige will generate and send comfort
Support
	noise when you are not talking.
	When you are dialing a telephone number the Prestige waits this long after
Dialing	you stop pressing the buttons before initiating the call. Select how many
Interval	seconds you want the Prestige to wait after the last input on the telephone’s
	keypad before dialing (making) a call.
Apply	Click Apply to save your changes back to the Prestige.
Reset	Click Reset to begin configuring this screen afresh.

Advanced voice settings configuration

Click VoIP in the navigation panel and then SIP to open the SIP Settings. Select a SIP account and then click Advanced Settings to display the following screen. Advanced voice settings configuration allows user to modify SIP server related settings, RTP port range, preferred compression type (codec), DTMF type and Message Waiting Indication (MWI)

132

All contents copyright (c) 2007 ZyXEL Communications Corporation.