ZyXEL Communications 2602HWL-D3A manual Hot Line Auto Dial

Prestige 2602HWL-D3A Support Notes

For example, if you need to block the call from 3333 (SIP Number) for 2 hours, you just need to input *95#3333*2# on the phone keypad, and it will implement this feature.

Hot Line (Auto Dial)

This feature enables the device to make a call to a predefined number as soon as the phone is off hook.

Application Scenario:

1.Configure the Hot Line setting first.

2.A lifts phone.

3.A will automatically dial the preconfigured number.

You may configure Hot Line (Auto Dial) easily on web GUI: VoIP > Phone > Analog Phone >

Advanced

Or by CLI command setting.

The CLI commands below are used to configure the Hot Line:

voice config fxs autodial enable	// Enable Hot Line (Auto Dial) Feature
voice config fxs autodial number	// Set Hot Line number
voice config fxs diallonginterval	// Set the interval between phone picking up and
dialing out

For example, if you want SIP1 phone to call 888888 automatically after the phone is off hook and without pressing any button on the phone keypad in 5 seconds.

The CLI commands below could implement it:

ras> voice config fxs index 1

ras> voice config fxs autodialenable 1 enable ras> voice config fxs autodialnumber 1 888888 ras> voice config fxs diallonginterval 1 5

157

All contents copyright (c) 2007 ZyXEL Communications Corporation.