Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 336 Contents, Key To Symbols, Introduction, What Is What?, General Safety Precautions

Models: 336

1 40

Download 40 pages 21.03 Kb

Page 3

CONTENTS

CONTENTS

Contents
KEY TO SYMBOLS
Symbols on the machine:	2
Symbols in the operator’s manual:	2
CONTENTS
Contents	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the chain saw?	5
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw	6
Important	6
Always use common sense	6
Personal protective equipment	7
Machine′s safety equipment	7
Cutting equipment	10
ASSEMBLY
Fitting the bar and chain	16
FUEL HANDLING
Fuel	17
STARTING AND STOPPING
Starting and stopping	19
WORKING TECHNIQUES
Before use:	21
General working instructions	21
How to avoid kickback	28
MAINTENANCE
General	29
Carburetor adjustment	29
Checking, maintaining and servicing chain saw safety
equipment	30
Mufﬂer	32
Starter	32
Air ﬁlter	33
Spark plug	34
Lubricating the bar tip sprocket	34
Adjustment of the oil pump	34
Cooling system	34
Maintenance schedule	35
TECHNICAL DATA
Technical data	36
Bar and chain combinations, model 336	37
Saw chain ﬁling and ﬁle gauges	37
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	38
AMERICAN STANDARD SAFETY PRECAUTIONS
Safety precautions for chain saw users	39

English – 3

Image 3

Husqvarna 336 Contents, Key To Symbols, Introduction, What Is What?, General Safety Precautions, Assembly, Fuel Handling

Contents

English Operator’s manual 336 EPAYou will ﬁnd the following labels on your chain saw EPA KEY TO SYMBOLSSymbols on the machine Symbols in the operator’s manualCONTENTS CONTENTSContents KEY TO SYMBOLSDear customer INTRODUCTIONWhat is what on the chain saw? WHAT IS WHAT?Always use common sense GENERAL SAFETY PRECAUTIONSBefore using a new chain saw WARNING! Faulty cutting equipment or theWARNING! Most chain saw accidents Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guardThe brake is applied when the front hand guard B is pushed forwards GENERAL SAFETY PRECAUTIONSRight hand guard Will my hand always activate the chain brake during a kickback?Throttle lock Chain catcherGeneral rules Stop switchCutting equipment MufﬂerSome terms that describe the bar and chain Sharpening your chain and adjusting depth gauge settingCutting equipment designed to minimise kickback ChainWARNING! Departure from the sharpening General advice on adjusting depth gauge settingAdjustment of depth gauge setting Sharpening cutting teethFilling with chain oil Tensioning the chainLubricating cutting equipment Chain oilChecking wear on cutting equipment Checking chain lubricationChain drive sprocket Needle bearing lubricationWARNING! Most chain saw accidents happen when the chain touches the operatorGENERAL SAFETY PRECAUTIONS Check regularlyworking with the chain, in order to protect your hands from injury ASSEMBLYFitting the bar and chain WARNING! Always wear gloves, whenGasoline ventilation when handling fuelFUEL HANDLING FuelTransport and storage Fuel safetyWARNING! Taking the following precautions will lessen the risk of ﬁre FuelingWarm engine STARTING AND STOPPINGStarting and stopping Cold engineStopping STARTING AND STOPPINGWARNING! Long term inhalation of the General working instructions Basic safety rulesWORKING TECHNIQUES Before useWORKING TECHNIQUES General rules6 Always use a fast cutting speed, i.e. full throttle WARNING! Never use a chain saw by holding Basic cutting techniqueGeneral TermsWORKING TECHNIQUES LimbingCutting WARNING! Never attempt to cut logs whileClearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionFelling cut FellingWARNING! Unless you have special training Directional cutsCutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a ”trapped tree”WARNING! Kickback can happen very How to avoid kickbackWhat is kickback? Cutting the trunk into logsFine adjustment MAINTENANCECarburetor adjustment Basic settings and running inChecking brake band wear Correctly adjusted carburetorWhen the bar hits the stump the brake should be applied High speed jet HChain catcher Checking the brake triggerMAINTENANCE Throttle lockChanging a broken or worn starter cord WARNING! When the recoil spring is woundMufﬂer StarterFitting the starter Air ﬁlterTensioning the recoil spring Changing a broken recoil springLubricating the bar tip sprocket Adjustment of the oil pumpWARNING! The engine must be stopped when making adjustments Spark plugMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceEngine TECHNICAL DATATechnical data WeightChain Recommended original and replacement bar and chain combinationsBar and chain combinations, model Saw chain ﬁling and ﬁle gaugesOWNER′S WARRANTY RESPONSIBILITIES FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURER′S WARRANTY COVERAGEOther safety precautions AMERICAN STANDARD SAFETY PRECAUTIONSSafety precautions for chain saw users Kickback safety precautions1150146-95 ´z+R.e¶5/¨ ´z+R.e¶5/¨