![](/images/new-backgrounds/1107635/10763575x1.webp)
MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.
Daily maintenance | Weekly maintenance | Monthly maintenance | |
|
|
| |
| On chain saws without a catalytic | Check the brake band on the chain brake | |
| for wear. Replace when less than 0.024 | ||
Clean the outside of the machine. | converter, check the cooling system | ||
inch (0.6 mm) remains at the most worn | |||
| weekly. | ||
| point. | ||
|
| ||
|
|
| |
Check that the components of the throttle | Check the starter, starter cord and return | Check the clutch centre, clutch drum and | |
control work safely. (Throttle lockout and | spring. | clutch spring for wear. | |
throttle control.) | |||
|
| ||
|
|
| |
Clean the chain brake and check that it |
|
| |
operates safely. Make sure that the chain | Check that the vibration damping | Clean the spark plug. Check that the | |
catcher is undamaged, and replace it if | elements are not damaged. | electrode gap is 0.020 inch (0.5 mm). | |
necessary with an aluminium chain | |||
|
| ||
catcher (is available as spare part). |
|
| |
|
|
| |
The bar should be turned daily for more |
|
| |
even wear. Check the lubrication hole in |
|
| |
the bar, to be sure it is not clogged. Clean | Lubricate the clutch drum bearing. | Clean the outside of the carburetor. | |
the bar groove. If the bar has a sprocket |
|
| |
tip, this should be lubricated. |
|
| |
|
|
| |
Check that the bar and chain are getting | File off any burrs from the edges of the | Check fuel hose for cracks or other | |
sufficient oil. | bar. | damage. Change if necessary. | |
|
|
| |
Check the saw chain with regard to visible |
|
| |
cracks in the rivets and links, whether the | Clean or replace the spark arrestor |
| |
saw chain is stiff or whether the rivets and | screen on the muffler. | Empty the fuel tank and clean the inside. | |
links are abnormally worn. Replace if |
|
| |
necessary. |
|
| |
|
|
| |
Sharpen the chain and check its tension |
|
| |
and condition. Check the drive sprocket | Clean the carburetor compartment. | Empty the oil tank and clean the inside. | |
for excessive wear and replace if | |||
|
| ||
necessary. |
|
| |
|
|
| |
Clean the starter units air intake. | Clean the air filter. Replace if necessary. | Check all cables and connections. | |
|
|
| |
Check that nuts and screws are tight. | Clean the area under the cover for the |
| |
| |||
|
| ||
|
|
| |
Check that the stop switch works |
|
| |
correctly. |
|
| |
|
|
| |
Check that there are no fuel leaks from |
|
| |
the engine, tank or fuel lines. |
|
| |
|
|
| |
On chain saws with a catalytic converter, |
|
| |
check the cooling system daily. |
|
| |
|
|
| |
Make sure the mechanism for the right- |
|
| |
hand brake operates smoothly. |
|
| |
|
|
|
38 – English