KEY to Symbols | Husqvarna 340, 345, 350 specification

KEY TO SYMBOLS

Symbols

CAUTION! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the instructions carefully and make sure you understand them before using the saw.

Always wear:

•Approved protective helmet

•Approved hearing protection

•Protective glasses or visor

Both of the operator´s hands must be used to operate the chain saw. Please see page 30 in your "Chain saw operator´s safety manual".

Never operate a chain saw holding it with one hand only. Please see page 30 in your "Chain saw operator´s safety manual".

Contact of the guide bar tip with any object should be avoided. Please see pages 12-21 in your "Chain saw operator´s safety manual".

Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury. Please see pages 12-21 in your "Chain saw operator´s safety manual".

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective glasses or a visor must be worn.

Refuelling

Chain oil and chain oil flow adjustment

2 – English

Image 2

Husqvarna 340, 345, 350 manual KEY to Symbols

Contents

340/345/350 101 90 KEY to Symbols Symbols Contents Safety Instructions Chain SAW Safety Equipment Chain brake and front hand guard Right hand guard Throttle lockChain catcher Muffler Stop switchVibration damping system Checking the inertia brake release Checking brake band wearChecking the front hand guard Checking the brake trigger Throttle lock Cutting Equipment 5 basic rules Saw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chain Sharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Tensioning the chain General advice on setting raker clearanceSetting the raker clearance Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oil Checking wear on cutting equipment Needle bearing maintenanceChecking chain lubrication Lubricating the bar tip sprocket HOW to Avoid Kickback What is kickback? Never use the saw one- handed General rulesDo not let go of the handles 10 ft General Safety PrecautionsMin m Basic safety rules General Working Instructions Terms Basic cutting techniqueGeneral Cutting Limbing Tree felling techniqueSafe distance Felling direction Clearing the trunk and preparing your retreat Felling Cutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped tree What is WHAT? What is what? 340 AssemblyMounting guide bar and chain 345/350 Fuel Handling Fuelmix 10ft FuellingMin 3 m Start Start and StopStart and stop Stop Maintenance Carburetor Changing a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil spring Air filter Needle bearing maintenanceAdjustment of the oil pump Muffler Cooling system Centrifugal cleaning Air InjectionTemperature -5C or colder Winter use Monthly maintenance Weekly maintenanceDaily maintenance Technical Data 340 345 350 Federal and California Emission Control Warranty Statement Your Warranty Rights Obligations 1998W48