MAINTENANCE

WARNING! Contact your servicing

! dealer, if the idle speed setting cannot be adjusted so that the chain stops at idle. Do not use the chain saw until it has been properly adjusted or repaired.

High speed jet H

At the factory the engine is adjusted at sea level. When working at a high altitude or in different weather conditions, temperatures and atmospheric humidity, it may be necessary to make minor adjustments to the high speed jet.

CAUTION! If the high speed jet is screwed in too far, it may damage the piston/cylinder.

When test run at the factory, the high speed jet is set so that the engine satisfies the applicable legal requirements at the same time as achieving maximum performance.

The carburetor’s high speed jet is then locked using a limiter cap in the fully screwed out position.The limiter cap limits the potential to adjust the high speed jet to at most half a turn.

Correctly adjusted carburetor

When the carburetor is correctly adjusted the machine accelerates without hesitation and the machine 4-cycles a little at max. speed. It is also important that the chain does not rotate at idle. If the L-jet is set too lean it may cause starting difficulties and poor acceleration. If the H- jet is set too lean the machine will have less power, poor acceleration and could suffer damage to the engine.

Checking, maintaining and servicing chain saw safety equipment

Note! All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below we recommend you to contact our servicing dealer.

Chain brake and front hand guard

Checking brake band wear

Brush off any wood dust, resin and dirt from the chain brake and clutch drum. Dirt and wear can impair operation of the brake.

Regularly check that the brake band is at least 0.024 inch (0.6 mm) thick at its thinnest point.

Checking the front hand guard

Make sure the front hand guard is not damaged and that there are no visible defects such as cracks.

Move the front hand guard forwards and back to make sure it moves freely and that it is securely anchored to the clutch cover.

English – 31

Page 30 Page 32
Page 31
Image 31
Husqvarna 1151435-95, 353 EPA III manual High speed jet H, Correctly adjusted carburetor, Checking brake band wear
Page 30 Page 32

353 EPA III, 1151435-95 specifications

The Husqvarna 1151435-95,353 EPA III is a notable addition to the world of outdoor power equipment, catering specifically to those who demand efficiency, power, and sustainability. This quality product is designed for both homeowners and professionals, striking an impeccable balance between high performance and user-friendly operation.

One of the standout features of the Husqvarna 1151435-95,353 EPA III is its cutting-edge 2-stroke engine technology. With a focus on reducing emissions, this engine complies with the stringent EPA III regulations, making it an environmentally responsible choice. It utilizes advanced combustion processes that not only enhance fuel efficiency but also minimize harmful exhaust pollutants, ensuring a cleaner atmosphere while delivering the power needed for demanding tasks.

Another remarkable characteristic of this model is its ergonomic design. The machine is built for comfort during prolonged use, featuring an adjustable handle, anti-vibration technology, and a lightweight structure that significantly reduces user fatigue. These ergonomics allow for better control and maneuverability, ensuring users can navigate varied terrains with ease.

The Husqvarna 1151435-95,353 EPA III also comes equipped with Smart Start technology, which simplifies the starting process. This feature minimizes resistance in the starter cord, making it easier to start the machine with minimal effort. This is especially beneficial for those who might struggle with traditional starting systems.

Additionally, this model showcases a well-designed cutting system. Its sharp, durable blades provide precision cutting, whether you're tackling thick grass or dense brush. The adjustable cutting height allows for customized performance to suit different types of landscaping needs, making it versatile in various scenarios.

Durability is another hallmark of the Husqvarna 1151435-95,353 EPA III. Constructed with high-quality materials, this machine is designed to withstand the rigors of outdoor work. Its robust build quality ensures longevity, reducing the need for frequent repairs or replacements.

Overall, the Husqvarna 1151435-95,353 EPA III represents a significant step in modern outdoor equipment. With its environmentally friendly engine, ergonomic design, easy starting capabilities, and robust cutting performance, it is well-suited for both professional landscapers and avid gardeners alike. This model epitomizes Husqvarna's commitment to innovation and quality, making it a reliable choice for anyone in need of efficient outdoor power tools.
Top Page Image Contents