GENERAL SAFETY PRECAUTIONS

Check that the chain is correctly tensioned. A slack chain will move sideways, making it more difficult to sharpen correctly.

Always file cutting teeth from the inside face. Reduce the pressure on the return stroke. File all the teeth on one side first, then turn the chain saw and file the teeth on the other side.

File all the teeth to the same length. When the length of the cutting teeth is reduced to 0.16 inch (4 mm) the chain is worn out and should be replaced.

General advice on adjusting depth gauge setting

When you sharpen the cutting tooth (A) the depth gauge setting (C) will decrease. To maintain optimal cutting performance the depth gauge (B) has to be filed down to achieve the recommended depth gauge setting. See instructions under the heading Technical data to find the correct depth gauge setting for your particular chain.

 

!

WARNING! The risk of kickback is

 

increased if the depth gauge setting is

 

 

 

 

too large!

 

 

 

Adjustment of depth gauge setting

The cutting teeth should be newly sharpened before adjusting the depth gauge setting. We recommend that you adjust the depth gauge setting every third time you sharpen the cutting teeth. NOTE! This recommendation assumes that the length of the cutting teeth is not reduced excessively.

You will need a flat file and a depth gauge tool. We recommend that you use our depth gauge tool to acheive the correct depth gauge setting and bevel for the depth gauge.

Place the depth gauge tool over the chain. Detailed information regarding the use of the depth gauge tool, will be found on the package for the depth gauge tool. Use the flat file to file off the tip of the depth gauge that protrudes through the depth gauge tool. The depth gauge setting is correct when you no longer feel resistance as you draw the file along the depth gauge tool.

Tensioning the chain

WARNING! A slack chain may jump off ! the bar and cause serious or even fatal

injury.

The more you use a chain the longer it becomes. It is therefore important to adjust the chain regularly to take up the slack.

Check the chain tension every time you refuel. NOTE! A new chain has a running-in period during which you should check the tension more frequently.

Tension the chain as tightly as possible, but not so tight that you cannot pull it round freely by hand.

Loosen the bar nuts that hold the clutch cover/chain brake. Use the combination spanner. Then tighten the bar nuts by hand as tight as you can.

Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it does not sag from the underside of the bar.

14 – English

Page 14
Image 14
Husqvarna 353 EPA III, 1151435-95 manual Tensioning the chain

353 EPA III, 1151435-95 specifications

The Husqvarna 1151435-95,353 EPA III is a notable addition to the world of outdoor power equipment, catering specifically to those who demand efficiency, power, and sustainability. This quality product is designed for both homeowners and professionals, striking an impeccable balance between high performance and user-friendly operation.

One of the standout features of the Husqvarna 1151435-95,353 EPA III is its cutting-edge 2-stroke engine technology. With a focus on reducing emissions, this engine complies with the stringent EPA III regulations, making it an environmentally responsible choice. It utilizes advanced combustion processes that not only enhance fuel efficiency but also minimize harmful exhaust pollutants, ensuring a cleaner atmosphere while delivering the power needed for demanding tasks.

Another remarkable characteristic of this model is its ergonomic design. The machine is built for comfort during prolonged use, featuring an adjustable handle, anti-vibration technology, and a lightweight structure that significantly reduces user fatigue. These ergonomics allow for better control and maneuverability, ensuring users can navigate varied terrains with ease.

The Husqvarna 1151435-95,353 EPA III also comes equipped with Smart Start technology, which simplifies the starting process. This feature minimizes resistance in the starter cord, making it easier to start the machine with minimal effort. This is especially beneficial for those who might struggle with traditional starting systems.

Additionally, this model showcases a well-designed cutting system. Its sharp, durable blades provide precision cutting, whether you're tackling thick grass or dense brush. The adjustable cutting height allows for customized performance to suit different types of landscaping needs, making it versatile in various scenarios.

Durability is another hallmark of the Husqvarna 1151435-95,353 EPA III. Constructed with high-quality materials, this machine is designed to withstand the rigors of outdoor work. Its robust build quality ensures longevity, reducing the need for frequent repairs or replacements.

Overall, the Husqvarna 1151435-95,353 EPA III represents a significant step in modern outdoor equipment. With its environmentally friendly engine, ergonomic design, easy starting capabilities, and robust cutting performance, it is well-suited for both professional landscapers and avid gardeners alike. This model epitomizes Husqvarna's commitment to innovation and quality, making it a reliable choice for anyone in need of efficient outdoor power tools.