MAINTENANCE

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts

•Excessive fuel consumption.

•Remove the air filter after taking off the air filter cover. When refitting make sure that the air filter seals tightly against the filter holder. Clean the filter by brushing or shaking it.

The filter can be cleaned more thoroughly by washing it in water and detergent.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter

must always be replaced.

A HUSQVARNA chain saw can be equipped with different types of air filters according to working conditions, weather, season, etc. Contact your dealer for advice.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

Note! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is fitted with a suppressor.

Lubricating the bar tip sprocket

Lubricate the bar tip sprocket each time you refuel. Use the special grease gun and a good quality bearing grease.

Needle bearing lubrication

The clutch drum has a needle bearing on the output shaft. This needle bearing must be lubricated regularly (once a week).

When lubricating, remove the clutch cover by loosening the two bar nuts. Lay the saw on its side with the clutch drum upwards.

Lubrication involves grease being squirted into the centre of the crankshaft using a grease gun.

English – 35

Page 34 Page 36
Page 35
Image 35
Husqvarna 1151435-95, 353 EPA III manual Air filter, Spark plug, Lubricating the bar tip sprocket, Needle bearing lubrication
Page 34 Page 36

353 EPA III, 1151435-95 specifications

The Husqvarna 1151435-95,353 EPA III is a notable addition to the world of outdoor power equipment, catering specifically to those who demand efficiency, power, and sustainability. This quality product is designed for both homeowners and professionals, striking an impeccable balance between high performance and user-friendly operation.

One of the standout features of the Husqvarna 1151435-95,353 EPA III is its cutting-edge 2-stroke engine technology. With a focus on reducing emissions, this engine complies with the stringent EPA III regulations, making it an environmentally responsible choice. It utilizes advanced combustion processes that not only enhance fuel efficiency but also minimize harmful exhaust pollutants, ensuring a cleaner atmosphere while delivering the power needed for demanding tasks.

Another remarkable characteristic of this model is its ergonomic design. The machine is built for comfort during prolonged use, featuring an adjustable handle, anti-vibration technology, and a lightweight structure that significantly reduces user fatigue. These ergonomics allow for better control and maneuverability, ensuring users can navigate varied terrains with ease.

The Husqvarna 1151435-95,353 EPA III also comes equipped with Smart Start technology, which simplifies the starting process. This feature minimizes resistance in the starter cord, making it easier to start the machine with minimal effort. This is especially beneficial for those who might struggle with traditional starting systems.

Additionally, this model showcases a well-designed cutting system. Its sharp, durable blades provide precision cutting, whether you're tackling thick grass or dense brush. The adjustable cutting height allows for customized performance to suit different types of landscaping needs, making it versatile in various scenarios.

Durability is another hallmark of the Husqvarna 1151435-95,353 EPA III. Constructed with high-quality materials, this machine is designed to withstand the rigors of outdoor work. Its robust build quality ensures longevity, reducing the need for frequent repairs or replacements.

Overall, the Husqvarna 1151435-95,353 EPA III represents a significant step in modern outdoor equipment. With its environmentally friendly engine, ergonomic design, easy starting capabilities, and robust cutting performance, it is well-suited for both professional landscapers and avid gardeners alike. This model epitomizes Husqvarna's commitment to innovation and quality, making it a reliable choice for anyone in need of efficient outdoor power tools.
Top Page Image Contents