SAFETY INSTRUCTIONS

1 Undo the bar nuts that hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by hand as tight as you can.

2 Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it not hang slack on the underside of the bar.

3 Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull the chain round freely by hand and that it is not slack on the bottom of the bar.

The position of the chain tensioning screw varies from model to model. See the” What is what” section to find out where it is on your saw.

4 Lubricating cutting equipment

Poor lubrication of cutting equipment may cause the chain to snap and lead to serious, even fatal injuries.

A Chain oil

Chainsaw chain oil must demonstrate good adhesion to the chain and also maintain its flow caracteristics regardless of whether it is warm summer or cold winter weather.

As a chainsaw manufacturer we have developed an optimal chain oil which has a vegetable oil base. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage.

If our own chain oil is not available, standard chain oil is recommended.

In areas where oil specifically for lubrication of saw chains is unavailable, ordinary EP 90 transmission oil may be used.

Never use waste oil!

This is dangerous for yourself, the saw and the environment.

BFilling with chain oil

• All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

• The sizes of the chain oil tank and fuel tank have been chosen so that the saw will run out of fuel before running out of oil. This means that you should never run with a dry chain.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a weak mixture may mean that the fuel lasts longer than the oil). You should also use the recommended cutting equipment (a bar that is too long will use more chain oil). The above conditions also apply to models with an adjustable oil pump.

14 – English

Page 14
Image 14
Husqvarna 355 manual Lubricating cutting equipment, Chain oil, Filling with chain oil, Never use waste oil

355 specifications

The Husqvarna 355 is a powerful and versatile chainsaw designed for professionals and avid woodworkers alike. This model is engineered to deliver optimal performance, efficiency, and reliability, making it a popular choice for various cutting tasks in forestry, landscaping, and wood processing.

One of the standout features of the Husqvarna 355 is its robust 50.2cc engine, which provides sufficient power for demanding cutting jobs. The chainsaw operates at a speed of up to 9,000 RPM, ensuring efficient and smooth cuts through even the toughest of materials. The air injection system plays a crucial role in enhancing the engine's performance by removing larger dust and debris particles before they can enter the air filter. This results in reduced filter cleaning and increased overall engine life.

The Husqvarna 355 is also designed with user comfort in mind. It includes an ergonomic handle that minimizes vibrations during operation, making prolonged use less taxing on the operator. Additionally, the lightweight design of the chainsaw allows for greater maneuverability, ensuring that users can navigate through various cutting scenarios without fatigue.

Safety is paramount in the design of the Husqvarna 355. It features a low kickback chain that significantly reduces the risk of kickback injuries, a common concern among chainsaw users. The chain brake system offers an added layer of protection, automatically engaging if the chainsaw experiences sudden upward movement. Furthermore, the chainsaw includes a throttle lock and a comfortable rear handle, ensuring safe operation.

Maintenance is simplified with the Husqvarna 355, thanks to its quick-release air filter and easy-access spark plug. These features allow users to perform maintenance tasks efficiently, ensuring the chainsaw remains in peak condition and ready for use.

Incorporating advanced technology, the Husqvarna 355 utilizes the X-Torq engine, which reduces fuel consumption and emissions. This environmentally friendly design contributes to making the chainsaw compliant with various regulations concerning emissions, while also lowering operational costs for users.

Overall, the Husqvarna 355 stands out in the competitive chainsaw market due to its combination of power, versatility, user-friendly features, and safety systems. Whether tackling large trees or performing detailed woodworking tasks, this chainsaw promises reliability and efficiency for both professionals and hobbyists.