Assembly Instructions
A
Preparing your lawnmower for use
•Your lawnmower is supplied with the upper handle folded over the machine for packing and transporta-
tion.
Handle in Operating Position
1.Lift handle as illustrated in figure A.
• Do not drop the handle.
B |
•Make sure that the cable does not become trapped between the handles
Attach the
B
This is used to store the power cable after using the product - see
Starting and Stopping
C |
1 |
E |
D |
To Start your Lawnmower
1. Connect plug to mains and switch on.
The switchbox is provided with a
2.Press and hold the
3.Continue to squeeze the start/stop lever towards the upper handle and release the
•NOTE: There are two start/stop levers fitted. Either one can be used for starting the lawnmower. IM- PORTANT: Do not use the start/stop levers intermit- tently.
To Stop your Lawnmower
1. Release the pressure on the Start/Stop lever.
How to Mow
F |
G |
x |
H
2
1
Mow twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time and this may also result in poor collection.
1.For the best results mow the outside edge of the lawn in a clockwise direction first. (H1)
2.Then start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut. (H2)
3.For best grass collection always mow in a straight line (F), do not swing the lawnmower from side to side (G)
Do Not Overload Your Mower
Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Adjusting the Cutting Height.
