Environmental Information
Husqvarna UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where practi- cal, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.
•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•Awareness of the environment must be considered when disposing of
•If necessary, contact your local authority for disposal information.
The symbol | on the product or on its packaging indicates that this product may not be treated as household waste. | ||||
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. | |||||
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environ- | |||||
ment and human health, which could otherwise be caused by inappropriate waste handling of this product. | |||||
For more detailed information about recycling of this product, please contact your local council office, your household | |||||
waste disposal service or the shop where you purchased the product. |
| ||||
|
|
| Replacement Parts |
| |
Blade |
|
|
|
|
|
340 |
| Reference no.: | FLY065 | Part no.: | 575338790 |
360 |
| Reference no.: | FLY063 | Part no.: | 521949990 |
380 |
| Reference no.: | FLY064 | Part no.: | 522022990 |
|
| EC Declaration of Conformity |
| ||
Husqvarna AB, |
|
|
| ||
Declare under our sole responsibility that the product(s); |
|
| |||
Designation | Lawnmower |
|
|
| |
Designation of Type(s) | ...........GM340, GM360, GM380 |
|
| ||
Identification of Series | See Product Rating Label |
|
| ||
Year of Construction | See Product Rating Label |
|
| ||
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level LpA at the operator’s position, measured according to
The maximum hand / arm vibration weighted value ah measured according to EN ISO 20643 on a sample of the above prod- uct(s) is given in the table.
2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated figures.
Conformity Assessment Procedure | Annex VI |
Notified Body | Intertek, Cleeve Road |
| Leatherhead, Surrey |
| KT22 7SB, England |
Newton Aycliffe 8/03/2012 |
|
M.Bowden |
|
Global R & D Director - Walk behind |
|
Keeper of technical documentation |
|
Type | GM340 | GM360 | GM380 |
Width of Cut (cm) | 34 | 36 | 38 |
Speed of Rotation of Cutting Device (rpm) | 4200 | 4200 | 4200 |
Power (kW) | 1.55 | 1.65 | 1.75 |
Measured Sound Power LWA (dB(A)) | 90 | 90 | 91 |
Guaranteed Sound Power LWA (dB(A)) | 92 | 92 | 92 |
Sound pressure LpA (dB(A)) | 79 | 79 | 79 |
Uncertainty KpA (dB(A)) | 2.5 | 2.5 | 2.5 |
Hand / arm vibration ah (m/s2) | 1.86 | 1.86 | 2.75 |
Uncertainty Kah (m/s2) | 1.5 | 1.5 | 1.5 |
Weight (Kg) | 11.45 | 11.45 | 11.55 |
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2012 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
of Flymo S.A.
Husqvarna AB.
Huskvarna
Sweden
