Technical Data, Technical data | Husqvarna 1153176-95, 385XPG

TECHNICAL DATA

Technical data

		385XP	390XP
	Motor
	Cylinder displacement, cu.in/cm3	5,2/84,7	5,4/88
	Cylinder bore, inch/mm	2,1/54	2,2/55
	Stroke, inch/mm	1,5/37	1,5/37
	Idle speed, rpm	2700	2700
	Power, kW/ rpm	4,6/9600	4,8/9600
	Ignition system
	Spark plug	NGK BPMR 7A/	NGK BPMR 7A/
	Spark plug	Champion RCJ 7Y	Champion RCJ 7Y
		Champion RCJ 7Y	Champion RCJ 7Y
	Electrode gap, inch/mm	0,02/0,5	0,02/0,5
	Fuel and lubrication system
	Fuel tank capacity, US pint/litre	1,9/0,9	1,9/0,9
	Oil pump capacity at 9,000 rpm, ml/min	6-24	6-24
	Oil tank capacity, US pint/litre	1,06/0,5	1,06/0,5
	Type of oil pump	Automatic	Automatic
	Weight
	Chain saw without bar or chain, empty tanks, lb/kg	15,4/7,0	15,6/7,1
		XPG: 15,9/7,2	XPG: 16,1/7,3
	Chain/bar
	Recommended bar lengths, inch/cm	18-28”/46-70	18-36”/49-90
	Usable cutting length, inches/cm	17-27"/43-68	17-35"/44-88
	Pitch, inch/mm	3/8" /9,52	3/8" /9,52
	Thickness of drive links, inch/mm	0,050/1,3	0,050/1,3
		0,058/1,5	0,058/1,5
		0,063/1,6	0,063/1,6
	Drive sprocket type/teeth	Rim/7	Rim/7
	Chain speed at max. power, m/sec	21,4	21,4

38 – English

Image 38

Husqvarna 1153176-95, 385XPG, 390XPG manual Technical Data, Technical data

Contents

385XP 385XPG 390XP 390XPG Symbols in the operator’s manual KEY to SymbolsSymbols on the machine EPA Contents Introduction Dear customer What is WHAT? What is what on the chain saw? Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping system Mufﬂer Stop switchCutting equipment General rules Chain Cutting equipment designed to reduce kickbackBar Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Tensioning the chain Lubricating cutting equipment Chain drive sprocket Filling with chain oilChecking chain lubrication Needle bearing lubrication Checking wear on cutting equipment Working with the chain AssemblyFitting the bar and chain Fuel Handling Fuel Transport and storage Fuel safetyFueling Long-term storage Cold engine Starting and StoppingStarting and stopping Warm engine Stopping Before use Basic safety rulesWorking Techniques General working instructions General rules Basic cutting technique Terms Safe distance Tree felling techniqueLimbing Felling direction Clearing the trunk and preparing your retreat Directional cuts Freeing a trapped tree Freeing a tree that has fallen badlyFelling cut Cutting trees and branches that are in tension General advice How to avoid kickbackWhat is kickback? Cutting the trunk into logs General MaintenanceCarburetor adjustment High speed jet H Fine adjustment of the idling speed TCorrectly adjusted carburetor Checking brake band wear Checking the inertia brake release Immediately Mufﬂer Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil spring Air ﬁlterSpark plug Fitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpWhen making adjustments Needle bearing lubrication Winter use Air Injection centrifugal cleaningTemperature 0C 32F or colder Heated handles Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data 058/1,5 mm Saw chain ﬁling and ﬁle gauges050/1,3 mm Federal Emission Control Warranty Statement Your Warranty Rights and Obligations Emission Controlwarranty Parts List Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsPage Original instructions 1153176-95