What is WHAT?, What is what on the chain saw?

WHAT IS WHAT?

What is what on the chain saw?

1	Cylinder cover	16	Bumper spike
2	Front handle	17	Chain catcher
3	Chain brake and front hand guard	18	Clutch cover
4	Starter	19	Rear handle with right hand guard
5	Chain oil tank	20	Throttle control
6	Starter handle	21	Throttle lockout
7	Adjuster screws carburetor	22	Decompression valve
8	Choke control/Start throttle lock	23	Combination spanner
9	Rear handle	24	Chain tensioning screw
10	Stop switch (Ignition on/off switch.)	25	Operator’s manual
11	Fuel tank	26	Bar guard
12	Mufﬂer	27	Switch for heated handle (385XPG, 390XPG)
13	Bar tip sprocket	28	Oil pump adjustment screw
14	Chain	29	Information and warning decal
15	Bar	30	Product and serial number plate

6 – English

Page 6

Image 6

Husqvarna 385XPG, 390XPG, 1153176-95 manual What is WHAT?, What is what on the chain saw?

Contents

385XP 385XPG 390XP 390XPG KEY to Symbols Symbols on the machineSymbols in the operator’s manual EPA Contents Introduction Dear customer What is WHAT? What is what on the chain saw? General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping system Mufﬂer Stop switchCutting equipment General rules Cutting equipment designed to reduce kickback BarChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Tensioning the chain Lubricating cutting equipment Chain drive sprocket Filling with chain oilChecking chain lubrication Needle bearing lubrication Checking wear on cutting equipment Assembly Fitting the bar and chainWorking with the chain Fuel Handling Fuel Transport and storage Fuel safetyFueling Long-term storage Cold engine Starting and StoppingStarting and stopping Warm engine Stopping Before use Basic safety rulesWorking Techniques General working instructions General rules Basic cutting technique Terms Safe distance Tree felling techniqueLimbing Felling direction Clearing the trunk and preparing your retreat Directional cuts Freeing a trapped tree Freeing a tree that has fallen badlyFelling cut Cutting trees and branches that are in tension General advice How to avoid kickbackWhat is kickback? Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral High speed jet H Fine adjustment of the idling speed TCorrectly adjusted carburetor Checking brake band wear Checking the inertia brake release Immediately Mufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil spring Air ﬁlterSpark plug Fitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpWhen making adjustments Needle bearing lubrication Winter use Air Injection centrifugal cleaningTemperature 0C 32F or colder Heated handles Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Saw chain ﬁling and ﬁle gauges 050/1,3 mm058/1,5 mm Federal Emission Control Warranty Statement Your Warranty Rights and Obligations Emission Controlwarranty Parts List Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsPage Original instructions 1153176-95