SAFETY INSTRUCTIONS

2 The log is supported at one end. There is a high risk that it will split.

AStart by cutting from below (about 1/3 of the way through).

BFinish by cutting from above so that the two cuts meet.

3Tree felling technique

!It takes a lot of experience to fell a tree. Inexperienced users of chain saws should not fell trees. NEVER ATTEMPT A TASK YOU ARE UNSURE OF.

A Safe distance

The safe distance between a tree that is to be felled and anyone else working nearby is at least 21/2 tree lengths.

Make sure that no-one else is in this “risk zone” before or during felling.

3 The log is supported at both ends. There is a high risk that the chain will jam.

AStart by cutting from above (about 1/3 of the way through).

BFinish by cutting from below so that the two cuts meet.

Limbing

When limbing thick branches you should use the same approach as for cutting.

Cut difficult branches piece by piece.

1

2

 

 

3

B Felling direction

The aim is to fell the tree in the best possible position for subsequent limbing and cross-cutting. You want it to fall on ground where you can move about safely.

The main point to avoid is letting the tree fall onto another tree. It can be both difficult and dangerous to remove a tree in such a position (see point 4 in this section).

Once you have decided which way you want the tree to fall you must judge which way the tree would fall naturally.

Several factors affect this:

Lean of the tree

Bend

Wind direction

Arrangement of branches

Weight of snow

You may find you are forced to let the tree fall in its natural direction because it is impossible or dangerous to try to make it fall in the direction you first intended.

Another very important factor, which does not affect the felling direction but does affect your safety, is to make sure the tree has no damaged or dead branches that might break off and hit you during felling.

!During critical felling operations, hearing protectors should be lifted immediately when sawing is completed so that sounds and warning signals can be heard.

English – 21

Page 20 Page 22
Page 21
Image 21
Husqvarna 40 manual Tree felling technique, Safe distance, Limbing, Felling direction
Page 20 Page 22

40 specifications

The Husqvarna 40 is a versatile and efficient chainsaw designed for both amateur and professional use. Known for its durability and performance, the Husqvarna 40 incorporates a range of features that make it suitable for various cutting tasks such as trimming, felling, and firewood processing.

One of the standout features of the 40 is its lightweight design, which enhances maneuverability and reduces user fatigue during prolonged use. Weighing in at approximately 10.8 pounds, it is easy to handle without compromising power. This chainsaw is equipped with a 40cc engine that delivers a commendable output, providing enough power to tackle most cutting jobs. The engine is designed for high efficiency, ensuring high performance while maintaining lower fuel consumption.

The Husqvarna 40 boasts an advanced air injection system, which minimizes the amount of dust and debris that can clog the air filter. This feature ensures that the engine operates smoothly, prolonging its lifespan and reducing maintenance costs. The chainsaw also includes an easy-access air filter, allowing users to carry out quick checks and replacements with minimal hassle.

Safety is paramount when it comes to chainsaw operation, and the Husqvarna 40 includes several safety features. It comes with a chain brake that automatically stops the chain in case of kickback, preventing potential accidents. Additionally, the chainsaw is fitted with low-vibration technology that reduces vibration levels, offering a more comfortable user experience and less strain on the arms and hands.

Another notable characteristic is the tool-less chain tensioning system, which allows users to adjust the chain tension quickly and easily without needing additional tools. This feature is particularly beneficial for users who need to make adjustments on the go, ensuring optimal cutting performance.

Furthermore, the Husqvarna 40 has a robust construction, made from high-quality materials designed to withstand the rigors of regular use. The ergonomic design includes a comfortable grip that ensures better control and handling, even in challenging conditions.

In summary, the Husqvarna 40 combines power, efficiency, and safety in a lightweight and user-friendly package. Whether tackling home improvement projects or managing larger tasks, this chainsaw stands out for its performance and reliability, making it an excellent choice for both novice and experienced users alike.
Top Page Image Contents