MAINTENANCE

Cooling system

Below you will find some general maintenance instructions. If you have more questions, contact your servicing dealer.

Daily maintenance

To obtain the lowest possible running temperature the saw is

equipped with a cooling

 

system.The cooling system

 

consists of:

5

1.

Air intake on the starter

4

 

unit.

 

 

2.

Air guide plate.

3

3.

Fan blades on the

 

 

flywheel.

 

4.

Cooling fins on the

 

 

cylinder.

2

 

 

5.

Cylinder cowling

1

 

(supplies cold air over

 

 

 

the cylinder).

 

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the saw overheating which causes damage to piston and cylinder.

Centrifugal cleaning ”Air Injection”

Centrifugal cleaning means the following:

All air to the carburettor is carried through the starter. Dirt and dust is centrifuged away by the cooling fan.

IMPORTANT! In order to keep the function of the centrifugal cleaning, a continous maintenance and care must be made.

• Clean the air intake to the starter, the fan wings of the flywheel, the space around the flywheel, inlet pipe and carburettor space.

1.Check the throttle trigger for smooth operation. If any binding occurs, or if engine fails to return to idle, the saw should be taken to your dealer, before it is used again. Also, be sure that the trigger cannot be pulled until the throttle trigger lockout is depressed.

2.Clean the chain brake and check its function according to the instructions. Make sure that the chain catcher is undamaged. Otherwise replace it immediately.

3.Clean or replace the air filter as necessary. Check for damage or holes.

4.The bar should be turned daily for more even wear. Check the lubrication hole in the bar, to be sure it is not clogged. Clean the bar groove, if the bar has a sprocket tip, this should be lubricated.

5.Check the function of the oiler to be sure the bar and chain receive proper lubrication.

6.Sharpen the chain and check its tension and condition. Check the drive sprocket for wear. Replace if necessary.

7.Check the starter and starter cord for wear or damage. Clean the air intake slots on the starter housing.

8.Check for any loose nuts and screws and retighten if necessary.

9.Test the stop switch to be sure it shuts off the engine.

1

2

3

4

5

6

7

8

9

32 – English

Page 32
Image 32
Husqvarna 40 manual Cooling system, Daily maintenance, Centrifugal cleaning Air Injection

40 specifications

The Husqvarna 40 is a versatile and efficient chainsaw designed for both amateur and professional use. Known for its durability and performance, the Husqvarna 40 incorporates a range of features that make it suitable for various cutting tasks such as trimming, felling, and firewood processing.

One of the standout features of the 40 is its lightweight design, which enhances maneuverability and reduces user fatigue during prolonged use. Weighing in at approximately 10.8 pounds, it is easy to handle without compromising power. This chainsaw is equipped with a 40cc engine that delivers a commendable output, providing enough power to tackle most cutting jobs. The engine is designed for high efficiency, ensuring high performance while maintaining lower fuel consumption.

The Husqvarna 40 boasts an advanced air injection system, which minimizes the amount of dust and debris that can clog the air filter. This feature ensures that the engine operates smoothly, prolonging its lifespan and reducing maintenance costs. The chainsaw also includes an easy-access air filter, allowing users to carry out quick checks and replacements with minimal hassle.

Safety is paramount when it comes to chainsaw operation, and the Husqvarna 40 includes several safety features. It comes with a chain brake that automatically stops the chain in case of kickback, preventing potential accidents. Additionally, the chainsaw is fitted with low-vibration technology that reduces vibration levels, offering a more comfortable user experience and less strain on the arms and hands.

Another notable characteristic is the tool-less chain tensioning system, which allows users to adjust the chain tension quickly and easily without needing additional tools. This feature is particularly beneficial for users who need to make adjustments on the go, ensuring optimal cutting performance.

Furthermore, the Husqvarna 40 has a robust construction, made from high-quality materials designed to withstand the rigors of regular use. The ergonomic design includes a comfortable grip that ensures better control and handling, even in challenging conditions.

In summary, the Husqvarna 40 combines power, efficiency, and safety in a lightweight and user-friendly package. Whether tackling home improvement projects or managing larger tasks, this chainsaw stands out for its performance and reliability, making it an excellent choice for both novice and experienced users alike.