MAINTENANCE

Starter device

!WARNING!

•When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

•Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

• Loosen the screws, that hold the starter device against the crankcase and remove the starter device.

•Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set the recoil spring by letting

the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

•Insert and fasten a new starter cord in the pulley. Wind approx. 3 turns of the starter cord on to the pulley. Assemble the starter pulley

against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

•Lift the starter cord up in the notch on the starter pulley and turn the starter pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

•Lift the starter pulley. (See ”Changing a broken or worn starter cord”). The recoil

spring is disassembled from the starter device, with its inside facing down. Tap the starter lightly against a working bench or similar.

• Put a new recoil spring in the right position. If the spring pops out when assembling, it should be mounted again, out and in towards the centre.

• Lubricate the recoil spring with thin oil. Assemble the starter pulley, and tension the recoil spring.

Starter device assembly

•Assemble the starter device, by pulling the starter cord out first, then place the

starter against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

• Assemble and tighten the screws, which hold the starter.

30 – English

Page 29 Page 31
Page 30
Image 30
Husqvarna 40 manual Changing a broken or worn starter cord, Tensioning the recoil spring, Starter device assembly
Page 29 Page 31

40 specifications

The Husqvarna 40 is a versatile and efficient chainsaw designed for both amateur and professional use. Known for its durability and performance, the Husqvarna 40 incorporates a range of features that make it suitable for various cutting tasks such as trimming, felling, and firewood processing.

One of the standout features of the 40 is its lightweight design, which enhances maneuverability and reduces user fatigue during prolonged use. Weighing in at approximately 10.8 pounds, it is easy to handle without compromising power. This chainsaw is equipped with a 40cc engine that delivers a commendable output, providing enough power to tackle most cutting jobs. The engine is designed for high efficiency, ensuring high performance while maintaining lower fuel consumption.

The Husqvarna 40 boasts an advanced air injection system, which minimizes the amount of dust and debris that can clog the air filter. This feature ensures that the engine operates smoothly, prolonging its lifespan and reducing maintenance costs. The chainsaw also includes an easy-access air filter, allowing users to carry out quick checks and replacements with minimal hassle.

Safety is paramount when it comes to chainsaw operation, and the Husqvarna 40 includes several safety features. It comes with a chain brake that automatically stops the chain in case of kickback, preventing potential accidents. Additionally, the chainsaw is fitted with low-vibration technology that reduces vibration levels, offering a more comfortable user experience and less strain on the arms and hands.

Another notable characteristic is the tool-less chain tensioning system, which allows users to adjust the chain tension quickly and easily without needing additional tools. This feature is particularly beneficial for users who need to make adjustments on the go, ensuring optimal cutting performance.

Furthermore, the Husqvarna 40 has a robust construction, made from high-quality materials designed to withstand the rigors of regular use. The ergonomic design includes a comfortable grip that ensures better control and handling, even in challenging conditions.

In summary, the Husqvarna 40 combines power, efficiency, and safety in a lightweight and user-friendly package. Whether tackling home improvement projects or managing larger tasks, this chainsaw stands out for its performance and reliability, making it an excellent choice for both novice and experienced users alike.
Top Page Image Contents