Husqvarna 426LST, 430LS manual Fueling, Mixing, WARNING! Taking the following, Fuel Handling

Models: 430LS 426LST

1 28
Download 28 pages 3.27 Kb
Page 12
Image 12
Mixing

FUEL HANDLING

Mixing

Always mix the gasoline and oil in a clean container intended for fuel.

Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

Do not mix more than one month’s supply of fuel at a time.

If the machine is not used for some time the fuel tank should be emptied and cleaned.

Fueling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

Ensure that the fuel is well mixed by shaking the container before filling the tank.

12 – English

Page 12
Image 12
Husqvarna 426LST Fueling, Mixing, WARNING! Taking the following, precautions, will lessen the risk of fire, Fuel Handling