Husqvarna 450 manuel dutilisation Technical Specifications, Conformity Certificates

TECHNICAL SPECIFICATIONS

Weight and Dimensions 450
Weight – dry	132 lbs	60 kg
Weight with gasoline and oil full	139 lbs	63 kg
Length	34 inch	864 mm
Width	19 inch	483 mm
Height	21 inch	533 mm
Blade
Material cut	Green concrete only
Blade type	8.0” (203 mm) dry cut with tri-arbor
Blade rotation	Counter clockwise, upcutting
Blade shaft speed	3350 rpm
Cutting depth	1 to 1 3/16 inch (25 to 30 mm) depending on amount of
	blade wear
Cutting distance from wall	3 inch	76 mm
Average cutting rate - Estimate only. Speed will vary with job conditions and concrete mixes.
Soft aggregates	13 ft/min	4.0 m/min
Medium aggregates	9 ft/min	2.7 m/min
Hard aggregates	5 ft/min	1.5 m/min
Engine:	Robin EX17
Engine oil volume	0.6 quart	0.6 liter
Gasoline tank volume	1.0 gal	3.6 liter
Type	Air cooled, 4-cycle, single slant cylinder, overhead
	camshaft, gasoline engine
Air filter	Cyclonic type
Oil system	Oil alert with auto shut down sensor
Muffler	Silent type 77 dbA, exhaust deflector, spark arrestor
Emissions	Complies with EPA Phase 2 and CARB Tier II USA
	regulations
Cooling	Air cooled with internal and external cooling fins
Cylinder	Aluminum with cast iron liner
Controls	Engine mounted manual throttle, choke and fuel shut
	off levers, manual on/off switch

CONFORMITY CERTIFICATES

CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt Off-Road Application­ as relating to CARB standards. Under construction equipment, and in particular, as a Saws : concrete, masonry, cutoff, with engine power less than 19KW (25hp), CARB standards do not apply to this machine.

For more information see the website http://www.arb.ca.gov/msprog/offroad/preempt.htm

14