Husqvarna 524STE owner manual To Replace Belts See Fig

Models: 524STE

1 32
Download 32 pages 20.62 Kb
Page 17
Image 17

SERVICE AND ADJUSTMENTS

TO REPLACE BELTS (See Fig. 21)

The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a qualified service center.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

TheV-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer.Using other than OEM belts can cause personal injury or damage to the snow thrower.

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing from the frame assembly, it is important that an assistant stand in the operating position and hold the snow thrower handles. Se- rious personal injury and/or damage to the unit could occur if the snow thrower should fall during the belt changing process.

FRAME

AUGER

ASSEMBLY

HOUSING

HANDLES

1.REMOVE GASOLINE FROM FUELTANK - Drain gaso- line from fuel tank into a suitable container, outdoors, away from fi re or flame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen locknut securing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY - Remove bolt, lockwasher and fl at washer securing pulley to engine crankshaft. Remove outside (auger) pulley only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the two (2) bolts and lock washers holding auger housing and frame together.

WARNING: As the last bolt is removed, have your assistant carefully lower the handles down to the ground.

6.REMOVE AUGER BELT from around pulley.

7.RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm and rotate ratchet clockwise to relieve tension.

8.With tension relieved on idler, install new traction drive belt around pulleys and inside belt keepers.

9.Place auger belt around and inside the groove of auger pulley only.

10.While your assistant slowly raises handles to rejoin the auger housing and frame assembly, pull up on the auger belt and squeeze sides together above pulley so belt is fully seated in groove of pulley.

11.Bring snow thrower completely together and check carefully for proper routing of belts. If auger belt has become dislodged from the pulley (by catching the idler arm bracket while bringing snow thrower together), separate the snow thrower and repeat step 10. Belt must be fully seated in pulley groove when bringing the snow thrower together.

12.Install the two (2) hex bolts and lock washers and tighten securely.

13.INSTALL ENGINE PULLEY - Place belt in pulley groove and slide pulley on crankshaft. Install fl at washer, lock- washer and bolt and tighten securely (30-35 ft. lbs. torque). Make sure belt is inside belt keeper.

14.INSTALL BELT COVER and two (2) screws. Tighten securely.

15.INSTALL DISCHARGE CHUTE – See “INSTALL DIS- CHARGE CHUTE / CHUTE ROTATER HEAD” in the Assembly / Pre-Operation section of this manual.

 

BELT KEEPER

 

 

 

TRACTION DRIVE BELT

 

 

ENGINE

FLAT WASHER

 

PULLEY

 

 

 

 

 

LOCKWASHER

 

 

BOLT

IDLER ARM

 

 

AUGER

SQUARE

 

 

BELT

HOLE

 

 

 

CLUTCHING

 

 

IDLER ARM

 

 

BRACKET

 

 

 

AUGER PULLEY

 

 

 

 

BOLT

LOCK

 

 

 

WASHER

FRAME

AUGER

 

 

 

HOUSING

 

 

17

FIG. 21

 

Page 17
Image 17
Husqvarna 524STE owner manual To Replace Belts See Fig

524STE specifications

The Husqvarna 524STE is a powerful and versatile snow thrower designed for homeowners who seek efficiency and performance in winter conditions. This piece of equipment is engineered to handle various types of snow, making it ideal for both light snowfalls and heavy snow accumulations. With its robust design and innovative features, the 524STE provides exceptional reliability and ease of use.

One of the standout features of the Husqvarna 524STE is its 24-inch clearing width. This allows the machine to clear large areas quickly, reducing the time spent on snow removal. The powerful engine, typically a 208cc 4-stroke, ensures that the snow thrower can handle dense snow even in harsh winter conditions. The 524STE also incorporates an easy-start mechanism, allowing for quick ignition even in cold weather, which is a significant advantage for early morning snow clearing.

The innovative two-stage snow thrower design is another key characteristic of the 524STE. This mechanism uses an auger to collect the snow before an impeller throws it away, which effectively reduces the likelihood of clogging and enhances performance. The adjustable chute allows operators to direct the snow precisely where they want it, providing better control and efficiency during operation.

Husqvarna has also equipped the 524STE with convenient features such as ergonomic controls and adjustable handle heights, which allow for comfortable operation for users of various sizes. The units are designed with durability in mind, featuring heavy-duty materials that can withstand harsh winter conditions. The snow thrower also comes with durable tires that enhance traction and maneuverability, enabling it to navigate various terrains effortlessly.

For added safety, the Husqvarna 524STE includes features such as a safety switch that ensures the machine only operates when the operator is in control. Easy maintenance options also allow for extended use, as owners can quickly service the machine as needed.

With its impressive range of features, advanced technologies, and user-friendly design, the Husqvarna 524STE is an excellent investment for anyone looking to tackle winter weather with confidence and efficiency. Whether managing the driveway or clearing pathways, this snow thrower proves to be a reliable partner in any snow-clearing task.