4.Connect the high pressure hose to the pump outlet (See Figure 4).
5.Attach the lance with nozzle to the gun (See Figure 5).
Figure 5 - Attach lance to gun
6.Install quick connect tip by pulling back on collar and pressing in tip. Release collar, make sure it completely returns to its forward position and tip is secure (See Figure 6).
Pull collar back
Figure 6 - Quick Connect Tip
For models 5525PW: Insert spray tips into the rubber tip holder. Then attached the tip holder to handle by wrapping around and inserting tail end through hole to secure (See Figure 7).
Figure 7 - Insert spray tips into the rubber tip holder
For models 6027PW, 9032PW, and 1340PW: Insert
spray tips into rubber grommets on placard (See Figure 8).
Figure 8 - Insert spray tips into the placard
English — 9
