OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the forward and reverse drive pedals.

•Start tractor and release parking brake.

•Slowly depress forward (K) or reverse (L) drive pedal to begin movement. Ground speed increases the further down the pedal is depressed.

TO USE CRUISE CONTROL (J) (See Fig. 7)

The cruise control feature can be used for forward travel only.

K

J

L

Fig. 7

SYSTEM CHARACTERISTICS

The cruise control should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning.

•With forward drive pedal depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever.

To disengage the cruise control, depress the brake pedal or tap on forward drive pedal.

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

A

Fig. 8

•Put attachment lift lever in desired cutting height slot.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2" during the cool season and to over 3" during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6" in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in prop- er position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a flat level surface.

•Adjustmowertodesiredcuttingheight(See“TOADJUST MOWER CUTTING HEIGHT” in this section of manual).

•Withmowerindesiredheightofcutposition,gaugewheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

Fig. 9

TO OPERATE MOWER (See Fig. 10)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch.

TO STOP MOWER BLADES -

Disengage attachment clutch control.

10

Page 9 Page 11
Page 10
Image 10
Husqvarna 917.24046 To Move Forward and Backward See Fig, To USE Cruise Control J See Fig, To Adjust Gauge Wheels See Fig
Page 9 Page 11

917.24046 specifications

The Husqvarna 917.24046 is a premium lawn mower designed to deliver exceptional performance and reliability for homeowners looking to maintain their lawns with ease. This model combines advanced features and innovative technology to provide a superior mowing experience.

One of the standout features of the Husqvarna 917.24046 is its powerful engine. Equipped with a robust Kohler engine, this mower provides sufficient power to tackle tough grass and uneven terrain with minimal effort. The engine's design allows for efficient fuel consumption, ensuring longer operating times between refueling sessions.

The 917.24046 also boasts a wide cutting deck, measuring 48 inches, which allows for more extensive coverage in a single pass. This feature is particularly beneficial for homeowners with larger lawns, as it reduces mowing time significantly. The cutting deck is constructed with high-quality materials to ensure durability and resistance to wear and tear over time.

A notable aspect of this model is its adjustable cutting height. Users can easily customize the cutting height to suit their lawn's specific needs, providing flexibility for different grass types and conditions. The mower's easy-to-use lever allows for quick height adjustments without the hassle of complicated mechanisms.

Another essential technology integrated into the Husqvarna 917.24046 is its mulching capability. This feature allows users to finely chop grass clippings, which are then returned to the lawn as a natural fertilizer. The mulching function promotes healthier grass growth by recycling nutrients, contributing to a greener lawn over time.

Additionally, the mower is designed with user comfort in mind. The ergonomically designed seats are padded to provide maximum comfort during extended mowing sessions. The steering system is responsive and easy to handle, allowing for smooth maneuverability around obstacles and tight corners.

Safety is also a priority in the design of the Husqvarna 917.24046. It features an automatic blade engagement system, which ensures that the blades only operate when the user is in control of the mower, reducing the risk of accidents.

In summary, the Husqvarna 917.24046 is a remarkable lawn care solution that combines power, efficiency, and user-friendly design. Its advanced features, such as the adjustable cutting height, mulching capability, and robust engine, make it a valuable asset for any homeowner looking to achieve a pristine lawn easily and effectively. With its durability and thoughtful design, the 917.24046 provides a reliable mowing experience for years to come.
Top Page Image Contents