Samsung LN46B530, LN52B530 Setting up the TV with your PC, Display Modes, Auto Adjustment, Screen

Display Modes

If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.

D-Sub and HDMI/DVI Input

Mode	Resolution		Horizontal Frequency	Vertical Frequency	Pixel Clock Frequency	Sync Polarity
			(KHz)	(Hz)	(MHz)	(H / V)
IBM	640 X 350		31.469	70.086	25.175	+/-
	720 X 400		31.469	70.087	28.322	-/+
MAC	640 X 480		35.000	66.667	30.240	-/-
	832	X 624	49.726	74.551	57.284	-/-
	1152 X 870		68.681	75.062	100.000	-/-
VESA CVT	720	X 576	35.910	59.950	32.750	-/+
	1152 X 864		53.783	59.959	81.750	-/+
	1280 X 720		44.772	59.855	74.500	-/+
	1280 X 960		75.231	74.857	130.000	-/+
	1280 X 720		56.456	74.777	95.750	-/+
VESA DMT	640	X 480	31.469	59.940	25.175	-/-
	640	X 480	37.861	72.809	31.500	-/-
	640	X 480	37.500	75.000	31.500	-/-
	800	X 600	37.879	60.317	40.000	+/+
	800	X 600	48.077	72.188	50.000	+/+
	800	X 600	46.875	75.000	49.500	+/+
	1024 X 768		48.363	60.004	65.000	-/-
	1024 X 768		56.476	70.069	75.000	-/-
	1024 X 768		60.023	75.029	78.750	+/+
	1152 X 864		67.500	75.000	108.000	+/+
	1280	X 1024	63.981	60.020	108.000	+/+
	1280	X 1024	79.976	75.025	135.000	+/+
	1280 X 800		49.702	59.810	83.500	-/+
	1280 X 800		62.795	74.934	106.500	-/+
	1280 X 960		60.000	60.000	108.000	+/+
	1360	X 768	47.712	60.015	85.500	+/+
	1440	X 900	55.935	59.887	106.500	-/+
	1440	X 900	70.635	74.984	136.750	-/+
	1680 X 1050		65.290	59.954	146.250	-/+
VESA GTF	1280 X 720		52.500	70.000	-	-/+
	1280 X 1024		74.620	70.000	128.943	-/-
VESA DMT /	1920 X 1080p		67.500	60.000	148.500	+/+
DTV CEA

NWhen using an HDMI / DVI cable connection, you must use the HDMI IN 1 jack.

¦Setting up the TV with your PC

NPreset: Press the SOURCE button to select PC mode.

❑Auto Adjustment

Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions.

T Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.

N This function does not work in DVI-HDMI mode.

Picture

Brightness	: 45
Sharpness	: 50
Auto Adjustment	►

Screen

Advanced Settings

Picture Options

Picture Reset

❑Screen

The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen.

Coarse / Fine

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on the center of screen.

PC Position

Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ►button to adjust the Horizontal-Position.

Image Reset

You can replace all image settings with the factory default values.

English - 28