ASSEMBLY

NOTE: You may now roll your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

•Raise attachment lift lever to its highest position.

•Release parking brake by depressing brake pedal.

•Place freewheel control in disengaged position to dis- engage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown on tires.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is operating properly. See “TO CHECK BRAKE” in the Service and Adjustments section of this manual.

✓CHECKLIST

BEFORE YOU OPERATE YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged.

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

✓Before driving tractor, be sure freewheel control is in “transmission engaged” position (see “TO TRANS- PORT” in the Operation section of this manual).

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls, their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

✓Be sure Operator Presence System and Reverse Op- eration System (ROS) are working properly (See the Operation and Maintenance sections in this manual).

✓It is important to purge the transmission before op- erating your tractor for the first time. Follow proper starting and transmission purging instructions (See “TO START ENGINE” and “PURGE TRANSMISSION” in the Operation section of this manual).

6

Page 5 Page 7
Page 6
Image 6
Husqvarna 96045001900 owner manual Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts
Page 5 Page 7

96045001900 specifications

The Husqvarna 96045001900 is a versatile and robust chainsaw designed to meet the demands of both professionals and enthusiasts in the field of forestry and landscaping. Its powerful engine and advanced features make it an ideal choice for various cutting tasks, whether for maintenance, tree felling, or pruning.

One of the standout features of this chainsaw is its high-performance engine. The Husqvarna 96045001900 is equipped with a reliable and efficient 50.2cc engine, which delivers exceptional power and speed. This engine not only provides the necessary torque for cutting through tough materials but also ensures that users can complete their tasks with minimal effort.

The chainsaw boasts a lightweight design, which enhances maneuverability without sacrificing durability. Weighing in at just about 11 lbs, it allows users to handle it with ease during extended periods of operation. The ergonomic handle contributes to this comfort, offering a secure grip that reduces fatigue, especially during larger jobs.

Another essential aspect of the Husqvarna 96045001900 is its advanced air filtration system. This feature helps in maintaining engine performance by keeping dust and debris out of the engine, thereby prolonging its lifespan and reducing maintenance needs. In addition, the chainsaw is designed with an automatic oiling system, ensuring that the chain is consistently lubricated for optimal performance.

The chainsaw also incorporates Husqvarna’s unique X-Torq technology, which reduces fuel consumption and minimizes exhaust emissions. This environmentally friendly innovation not only contributes to lower operating costs but also meets stringent emission regulations, making it suitable for use in eco-sensitive areas.

Safety features are paramount in the design of the Husqvarna 96045001900. It comes equipped with a chain brake that stops the chain immediately in case of kickback, ensuring user safety. Furthermore, the front hand guard and throttle lockout prevent accidental starts and provide additional protection while operating the saw.

In conclusion, the Husqvarna 96045001900 is a high-quality chainsaw that excels in power, efficiency, and safety. With its powerful engine, lightweight construction, advanced air filtration, and cutting-edge technologies, it stands out as a top choice for anyone looking to tackle tough cutting jobs with ease and confidence. Whether for professional forestry work or home landscaping projects, this chainsaw delivers performance and reliability that make it a worthy investment.
Top Page Image Contents