Husqvarna 96045001900 owner manual First Install ANTI-SWAY BAR S

SERVICE AND ADJUSTMENTS

•Turn steering wheel to the left as far as it will go and position mower on right side of tractor with deflector shield to the right.

02965

Fig. 21

NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

A

02965

Fig. 22

•FIRST INSTALL ANTI-SWAY BAR (S).

-From right side of mower, insert anti-sway bar into hole in transmission bracket (T).

T	S
A
	02995

Fig. 23

-Pivot bar towards you and insert other end of bar into hole in rear mower bracket (D). Move mower as needed to insert bar.

- Secure with washer and retainer spring as shown 19

D

02996

Fig. 24

•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

A

B

Fig. 25

•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

C

D

Fig. 26

•Turn steering wheel to position wheels straight for- ward.