MAINTENANCE

•At least once a year, replace the spark plug, clean or replace air filter element and check blade for wear. A new spark plug and clean/new air filter element assure proper air-fuel mixture and help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See “LUBRICATION CHART”).

IMPORTANT: DO NOT OIL OR GREASE PLASTIC WHEEL BEARINGS. VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN THE LIFE OF THE SELF- LUBRICATING BEARINGS. IF YOU FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POWDERED GRAPHITE TYPE LUBRICANT SPARINGLY.

LUBRICATION CHART

➀ WHEEL

ADJUSTER (ON EACH WHEEL)

➁ ENGINE OIL

➀ MULCHER

DOOR HINGE PIN

➀ REAR DOOR HINGE

➀HANDLE BRACKET MOUNTING PINS

➀SPRAY LUBRICANT

➁SEE “ENGINE” IN MAINTENANCE SECTION

LAWN MOWER

Always observe safety rules when performing any main- tenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chem- icals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both front wheels.

1.Remove hubcaps, locknuts and washers.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/or drive wheel gear teeth.

4.Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a qualified service center.

BLADE CARE

For best results, mower blade must be kept sharp. Replace bent or damaged blades.

CAUTION: Useonlyareplacementblade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty.

TO REMOVE BLADE (See Fig. 11)

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter-clockwise.

5.Remove blade and attaching hardware (bolt, lock washer and hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

BLADE ADAPTER

KEY

CRANKSHAFT

 

 

KEYWAY

BLADE

 

 

LOCK

 

 

WASHER

 

 

BLADE

BOLT

HARDENED

TRAILING EDGE

CRANKSHAFT

WASHER

FIG. 11

10

Page 9 Page 11
Page 10
Image 10
Husqvarna 961330018 owner manual Lubrication Chart, Lawn Mower
Page 9 Page 11

961330018 specifications

The Husqvarna 961330018 is a premium chainsaw designed for both professional and advanced consumer use, embodying the ideal combination of power, efficiency, and usability. Aimed at tackling demanding tasks, this model stands out due to its robust features and cutting-edge technology tailored for optimal performance.

At the heart of the Husqvarna 961330018 is a powerful engine that delivers exceptional cutting performance. The chainsaw comes equipped with a high-performance 60cc motor that generates impressive horsepower, allowing users to cut through dense wood and tough materials with ease. The engine is designed to reduce emissions, ensuring that it meets environmental regulations while still providing the power you need for heavy-duty tasks.

One of the key technologies integrated into this chainsaw is the Fuel Efficiency technology, which optimizes fuel usage and enhances overall runtime. With its advanced ignition system, the chainsaw starts easily and runs smoothly, minimizing downtime and enhancing productivity. The fuel tank is designed for extended operation, allowing users to complete more tasks without frequent refueling.

Another noteworthy feature is the X-Torq engine technology. This innovation minimizes fuel consumption and reduces exhaust emissions, providing a more environmentally friendly solution without compromising power. It's particularly valuable for professionals who need a reliable tool that aligns with sustainable practices.

User comfort and safety are also prioritized in the design of the Husqvarna 961330018. The chainsaw is equipped with an ergonomic handle and low-vibration technology, which reduces hand fatigue during extended use. The automatic chain lubrication system ensures that the chain remains lubricated for smoother operation, while the quick-release air filter and easy-access side-mounted chain tensioning system simplify maintenance.

The chainsaw features a durable construction, built to withstand the rigors of heavy use. Its lightweight design facilitates maneuverability, making it easier to handle in various cutting scenarios, whether you're felling trees or trimming branches.

In summary, the Husqvarna 961330018 is a powerful and efficient chainsaw that caters to the needs of both professionals and dedicated enthusiasts. With its advanced technologies, user-friendly features, and commitment to sustainability, this model represents a benchmark in chainsaw performance and reliability, making it an excellent choice for tackling a wide range of cutting tasks.
Top Page Image Contents