STORAGE

Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire lawn mower (See “CLEANING” in the Maintenance section of this manual).

2.LubricateasshowninMaintenancesectionofthismanual.

3.Be sure that all nuts, bolts, screws, and pins are se-

curely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

HANDLE (See Figs. 18 and 19)

You can fold your lawn mower handle for storage.

1.Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward.

2.Loosen upper handle mounting bolts enough to allow upper handle to be folded back.

IMPORTANT: WHEN FOLDING THE HANDLE FOR STORAGE OR TRANSPORTATION, BE SURE TO FOLD THE HANDLE AS SHOWN OR YOU MAY DAMAGE THE CONTROL CABLES.

When setting up your handle from the storage position, lower handle will automatically lock into mowing position.

SQUEEZE

TO ADJUST

LOWER HANDLE

FIG. 18

OPERATOR

MOWING

POSITION

PRESENCE

CONTROL BAR

 

 

FOLD

 

FORWARD

 

FOR

 

STORAGE

 

UPPER

 

HANDLE

 

HANDLE

 

KNOB

 

LOWER

 

HANDLE

FIG. 19

14

ENGINE

Maintenance, repair, or replacement of the emission con- trol devices and systems, which are being done at the customers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer's service outlet.

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your unit indoors and cover it to give protection from dust and dirt.

Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER MOWER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

CAUTION: Never store the lawn mower with gasoline in the tank inside a build- ing where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

Page 14
Image 14
Husqvarna 961330018 owner manual Storage, Other, Fuel System, Engine OIL, Cylinder

961330018 specifications

The Husqvarna 961330018 is a premium chainsaw designed for both professional and advanced consumer use, embodying the ideal combination of power, efficiency, and usability. Aimed at tackling demanding tasks, this model stands out due to its robust features and cutting-edge technology tailored for optimal performance.

At the heart of the Husqvarna 961330018 is a powerful engine that delivers exceptional cutting performance. The chainsaw comes equipped with a high-performance 60cc motor that generates impressive horsepower, allowing users to cut through dense wood and tough materials with ease. The engine is designed to reduce emissions, ensuring that it meets environmental regulations while still providing the power you need for heavy-duty tasks.

One of the key technologies integrated into this chainsaw is the Fuel Efficiency technology, which optimizes fuel usage and enhances overall runtime. With its advanced ignition system, the chainsaw starts easily and runs smoothly, minimizing downtime and enhancing productivity. The fuel tank is designed for extended operation, allowing users to complete more tasks without frequent refueling.

Another noteworthy feature is the X-Torq engine technology. This innovation minimizes fuel consumption and reduces exhaust emissions, providing a more environmentally friendly solution without compromising power. It's particularly valuable for professionals who need a reliable tool that aligns with sustainable practices.

User comfort and safety are also prioritized in the design of the Husqvarna 961330018. The chainsaw is equipped with an ergonomic handle and low-vibration technology, which reduces hand fatigue during extended use. The automatic chain lubrication system ensures that the chain remains lubricated for smoother operation, while the quick-release air filter and easy-access side-mounted chain tensioning system simplify maintenance.

The chainsaw features a durable construction, built to withstand the rigors of heavy use. Its lightweight design facilitates maneuverability, making it easier to handle in various cutting scenarios, whether you're felling trees or trimming branches.

In summary, the Husqvarna 961330018 is a powerful and efficient chainsaw that caters to the needs of both professionals and dedicated enthusiasts. With its advanced technologies, user-friendly features, and commitment to sustainability, this model represents a benchmark in chainsaw performance and reliability, making it an excellent choice for tackling a wide range of cutting tasks.