SAFETY RULES

Safe Operation Practices for Walk-Behind Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

Stop the blade(s) when crossing gravel drives, walks, or roads.

Stop the engine (motor) whenever you leave the equip- ment, before cleaning the mower or unclogging the chute.

CAUTION: Always disconnect spark plug wire and place wire where it cannot contact spark plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING: Engine exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shut the engine (motor) off and wait until the blade comes to complete stop before removing grass catcher.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle and walk; never run.

Disengage the self-propelled mechanism or drive clutch onmowerssoequippedbeforestartingtheengine(motor).

If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

Always wear safety goggles or safety glasses with side shields when operating mower.

II. SLOPE OPERATION

Slopes are a major factor related to slip and fall accidents which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it.

DO:

Mow across the face of slopes: never up and down. Exer- cise extreme caution when changing direction on slopes.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

DO NOT:

I. GENERAL OPERATION

Do not trim near drop-offs, ditches or embankments. The operator could lose footing or balance.

• Read, understand, and follow all instructions on the

 

• Do not trim excessively steep slopes.

 

• Do not mow on wet grass. Reduced footing could cause

 

machine and in the manual(s) before starting. Be thor-

 

 

oughly familiar with the controls and the proper use of

 

slipping.

 

the machine before starting.

 

III. CHILDREN

• Do not put hands or feet near or under rotating parts.

 

 

Keep clear of the discharge opening at all times.

 

Tragic accidents can occur if the operator is not alert to

• Only allow responsible individuals, who are familiar

 

the presence of children. Children are often attracted to

 

with the instructions, to operate the machine.

 

the machine and the mowing activity. Never assume that

Clear the area of objects such as rocks, toys, wire,

 

children will remain where you last saw them.

 

bones, sticks, etc., which could be picked up and thrown

 

• Keep children out of the trimming area and under the

 

by the blade.

 

watchful care of another responsible adult.

• Be sure the area is clear of other people before mow-

 

• Be alert and turn machine off if children enter the

 

ing. Stop machine if anyone enters the area.

 

area.

• Do not operate the mower when barefoot or wearing

 

• Before and while walking backwards, look behind and

 

open sandals. Always wear substantial foot wear.

 

down for small children.

• Do not pull mower backwards unless absolutely nec-

 

• Never allow children to operate the machine.

 

essary. Always look down and behind before and while

 

• Use extra care when approaching blind corners, shrubs,

 

moving backwards.

 

trees, or other objects that may obscure vision.

• Never direct discharged material toward anyone.

 

IV. SAFE HANDLING OF GASOLINE

 

Avoid discharging material against a wall or obstruc-

 

 

tion. Material may richochet back toward the operator.

 

Use extreme care in handling gasoline. Gasoline is ex-

 

Stop the blade when crossing gravel surfaces.

 

 

 

tremely flammable and the vapors are explosive.

Do not operate the mower without proper guards,

 

 

• Extinguish all cigarettes, cigars, pipes and other sources

 

plates, grass catcher or other safety protective devices

 

 

 

of ignition.

 

in place.

 

 

 

• Use only an approved container.

• See manufacturer’s instructions for proper operation

 

 

• Never remove gas cap or add fuel with the engine run-

 

and installation of accessories. Only use accessories

 

 

2

ning. Allow engine to cool before refueling.

 

approved by the manufacturer.

 

 

Page 2
Image 2
Husqvarna 961330018 Safe Operation Practices for Walk-Behind Mowers, II. Slope Operation, General Operation, III. Children

961330018 specifications

The Husqvarna 961330018 is a premium chainsaw designed for both professional and advanced consumer use, embodying the ideal combination of power, efficiency, and usability. Aimed at tackling demanding tasks, this model stands out due to its robust features and cutting-edge technology tailored for optimal performance.

At the heart of the Husqvarna 961330018 is a powerful engine that delivers exceptional cutting performance. The chainsaw comes equipped with a high-performance 60cc motor that generates impressive horsepower, allowing users to cut through dense wood and tough materials with ease. The engine is designed to reduce emissions, ensuring that it meets environmental regulations while still providing the power you need for heavy-duty tasks.

One of the key technologies integrated into this chainsaw is the Fuel Efficiency technology, which optimizes fuel usage and enhances overall runtime. With its advanced ignition system, the chainsaw starts easily and runs smoothly, minimizing downtime and enhancing productivity. The fuel tank is designed for extended operation, allowing users to complete more tasks without frequent refueling.

Another noteworthy feature is the X-Torq engine technology. This innovation minimizes fuel consumption and reduces exhaust emissions, providing a more environmentally friendly solution without compromising power. It's particularly valuable for professionals who need a reliable tool that aligns with sustainable practices.

User comfort and safety are also prioritized in the design of the Husqvarna 961330018. The chainsaw is equipped with an ergonomic handle and low-vibration technology, which reduces hand fatigue during extended use. The automatic chain lubrication system ensures that the chain remains lubricated for smoother operation, while the quick-release air filter and easy-access side-mounted chain tensioning system simplify maintenance.

The chainsaw features a durable construction, built to withstand the rigors of heavy use. Its lightweight design facilitates maneuverability, making it easier to handle in various cutting scenarios, whether you're felling trees or trimming branches.

In summary, the Husqvarna 961330018 is a powerful and efficient chainsaw that caters to the needs of both professionals and dedicated enthusiasts. With its advanced technologies, user-friendly features, and commitment to sustainability, this model represents a benchmark in chainsaw performance and reliability, making it an excellent choice for tackling a wide range of cutting tasks.