Other, Fuel System, Engine OIL, Cylinder

STORAGE

	OPERATOR	MOWING
	OPERATOR	POSITION
	PRESENCE	POSITION
	CONTROL
	BAR
		FOLD
		FORWARD
		FOR
		STORAGE
		UPPER
		HANDLE
		HANDLE
		KNOB
		LOWER
		HANDLE

FIG. 20

BOLT

KNOB

HANDLE

BRACKET

FIG. 21

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OFACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to give protection from dust and dirt.

•Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER MOWER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

CAUTION: Never store the lawn mower with gasoline in the tank inside a build- ing where fumes may reach an open ﬂame or spark. Allow the engine to cool before storing in any enclosure.

961430096 specifications

The Husqvarna 961430096, also known as the Husqvarna 562 XP, is a high-performance chainsaw designed for professionals and serious enthusiasts. Renowned for its exceptional power-to-weight ratio, this model is ideal for demanding tasks, including felling, limbing, and bucking trees of various sizes.

One of the standout features of the Husqvarna 562 XP is its X-Torq engine technology. This innovative engine reduces fuel consumption by up to 20%, contributing to lower emissions without sacrificing power. The chainsaw delivers impressive cutting performance with its 60.3 cc engine, achieving a maximum power output of 3.5 kW. This efficiency not only translates to prolonged usage without frequent refueling but also promotes a cleaner working environment.

In terms of design, the Husqvarna 961430096 incorporates an ergonomic handle, providing superior comfort and balance during operation. The saw’s lightweight structure aids maneuverability, essential for precision cutting in various conditions. Additionally, the rear handle features rubber inserts for improved grip and reduced vibrations, enabling extended use without causing fatigue.

The Husqvarna 562 XP also incorporates advanced air injection technology, which helps filter out larger particles from the air intake before they reach the air filter. This results in less frequent air filter maintenance, thereby enhancing the chainsaw’s productivity and longevity. Coupled with the easy-access fuel and oil caps, which allow for quick refueling, this model is designed to keep users focused on the task at hand rather than maintenance.

Another key feature is the LowVib system, which minimizes vibrations felt by the user. This ensures a more comfortable working experience, especially during prolonged jobs, reducing the likelihood of operator fatigue and injury.

Safety is also prioritized in the Husqvarna 961430096, as it includes a chain brake and an inertia-activated kickback brake, which provide an essential safeguard against accidents. A see-through fuel tank lets users easily monitor fuel levels, preventing unexpected run-outs during use.

Overall, the Husqvarna 961430096 combines power, efficiency, and user-friendly features, making it an excellent choice for those needing a reliable chainsaw capable of tackling tough jobs with ease. Its blend of advanced technologies ensures both performance and sustainability in demanding working conditions. Whether you are a professional logger or a dedicated landowner, this chainsaw stands out as a formidable tool in the domain of outdoor power equipment.

Husqvarna 961430096 warranty Other, Fuel System, Engine OIL, Cylinder

Models: 961430096