Technical Data, Technical data | Husqvarna 965030292 specs

TECHNICAL DATA
Technical data
	455
Engine
Cylinder displacement, cu.in/cm3	3,38/55,5
Cylinder bore, inch/mm	1,85/47
Stroke, inch/mm	1,28/32
Idle speed, rpm	2700
Power, hp/kW @ rpm	3,4/2,5 @9000
Ignition system
Manufacturer of ignition system	SEM
Type of ignition system	CD
Spark plug	NGK BPMR 7A/
	Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5
Fuel and lubrication system
Manufacturer of carburetor	Walbro
Carburetor type	WTA
Fuel tank capacity, US pint/litre	0,93/0,44
Oil pump capacity at 9,000 rpm, ml/min	11,5
Oil tank capacity, US pint/litre	0,68/0,32
Type of oil pump	Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg	13,0/5,9
Chain/bar
Standard bar length, inch/cm	13"/33
Recommended bar lengths, inch/cm	13-20"/33-50
Usable cutting length, inches/cm	12-19"/31-49
Pitch, inch/mm	0,325/8,25
Gauge, inch/mm	0,050/1,3
	0,058/1,5
	0,063/1,6
Drive sprocket type/teeth	Rim/7
Chain speed at max. power, m/sec	17,3

38 – English

Page 38

Image 38

Husqvarna 965030292 manual Technical Data, Technical data

Contents

Rancher KEY to Symbols Key to symbols Contents Introduction Dear customer What is WHAT? What is what on the chain saw? Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockChain catcher Vibration damping system Mufﬂer Stop switchCutting equipment General rules Chain Cutting equipment designed to reduce kickbackBar Some terms that describe the bar and chain Sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Filling with chain oil Lubricating cutting equipmentChain oil Checking chain lubrication Needle bearing lubrication Checking wear on cutting equipment Assembly Fitting the bar and chain Fuel Handling Fuel Transport and storage Fuel safetyFueling Long-term storage Cold engine Starting and StoppingStarting and stopping Warm engine Stopping Before use Basic safety rulesWorking Techniques General working instructions General rules Terms Basic cutting techniqueGeneral Limbing Cutting Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreat Felling Directional cuts Freeing a tree that has fallen badly Freeing a trapped tree General advice How to avoid kickbackWhat is kickback? Cutting trees and branches that are in tension Cutting the trunk into logs General MaintenanceCarburetor adjustment Checking brake band wear Correctly adjusted carburetorHigh speed jet H Checking the front hand guard Checking the brake trigger Changing a broken or worn starter cord MufﬂerStarter Changing a broken recoil spring Air ﬁlterTensioning the recoil spring Fitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpSpark plug Needle bearing lubrication Temperature -5C 23F or colder Air Injection centrifugal cleaningTemperature 0C 32F or colder Winter use Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Bar and chain combinations Federal Emission Control Warranty Statement Your Warranty Rights and Obligations Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions ´z+H8o¶5u¨ Page 1140247-95 ´z+H8o¶5u¨ ´z+H8o¶5u¨

TECHNICAL DATA

Technical data

Engine

Ignition system

Fuel and lubrication system

WTA

Chain/bar