GENERAL SAFETY PRECAUTIONS

If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

!converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin. Remember the risk of fire!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

!The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

Tighten the nut using the socket spanner. 35-50 Nm (3.5- 5 kpm).

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of blade thrust.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! A faulty cutting attachment may

!increase the risk of accidents.

Trimmer head

IMPORTANT!

Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.

Only use the recommended trimmer heads and trimmer cords.These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the recommended cutting attachment. See the chapter on Technical data.

Smaller machines generally require small trimmer heads and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared.

The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

Make sure that the cutter on the trimmer guard is intact. This is used to cut the cord to the correct length.

To increase the life of the cord it can be soaked in water for a couple of days.This will make the line tougher so that it lasts longer.

English – 9

Page 9
Image 9
Husqvarna 965069703 manual Cutting equipment, Locking nut, Trimmer head

965069703 specifications

The Husqvarna 965069703 is a powerful and versatile chainsaw designed to meet the demands of both professionals and outdoor enthusiasts. Engineered with advanced technology and robust components, this chainsaw is ideal for a variety of cutting tasks, from pruning and trimming to felling larger trees.

One of the standout features of the Husqvarna 965069703 is its reliable 2-stroke gas engine. This engine is not only efficient but also designed to provide lower emissions, aligning with modern environmental standards. This characteristic ensures that users can operate the chainsaw with minimal impact on the surrounding ecosystem while still achieving high performance.

The chainsaw features an Easy Start system, which simplifies the starting process. This technology reduces the effort needed to start the engine, making it accessible even for those who may not have extensive experience with chainsaws. Additionally, the air injection system works to extend the air filter life by removing larger dust and debris particles before they reach the filter. This helps maintain optimal engine performance over time.

In terms of safety, the Husqvarna 965069703 is equipped with a chain brake that quickly halts the chain's movement in case of kickback. This feature is crucial for preventing accidents and ensuring a safer cutting experience. Moreover, the low vibration technology incorporated into the design helps reduce operator fatigue, allowing for longer periods of use without discomfort.

The chainsaw is also equipped with a tool-less chain tensioning system, which provides quick and easy adjustments to the chain tension without the need for additional tools. This ensures that users can maintain optimal cutting performance and efficiency during operation.

Another significant characteristic of the Husqvarna 965069703 is its durable construction. Built with high-quality materials, this chainsaw is capable of withstanding the rigors of professional use and harsh outdoor conditions. The ergonomic design further enhances user comfort and control, which can lead to better results during intricate cutting tasks.

In summary, the Husqvarna 965069703 stands out for its powerful engine, easy start capability, enhanced safety features, and durable construction. These characteristics make it an excellent choice for both casual users and professionals seeking a reliable and efficient chainsaw. Whether for landscaping, property maintenance, or forestry work, this chainsaw delivers performance and ease of use, making it a valuable addition to any toolkit.