9
3MOUNTING BLOWER ASSEMBLY
Outer Pulley Cover Pin
Hairpin Cotter
RearMountBracket
Contact Area
1. Position blower over the discharge tabs on the
deckandsetblowerontothedeck.
2. Besuretheblowerissittingushagainstthe
outsideofthedeck.
3. Installthefrontmountbrackettothedeckwiththe
pinandhairpincottersuppliedwiththekit.
ASSEMBLY
1. Makesurethetensionreleaseleverisforwardor
disengaged.
2. Placethebeltoverthepulleyonthedeck.Referto
illustration for proper routing.
3. Move the tension release arm to the rear and
engage in the latch.
4INSTALLING DRIVE BELT
RearOfDeck Idler Pulleys
Outer Pulley
Twist in Belt
Tension Release Arm