TECHNICAL DATA
Recommended cutting equipment for Canada
The following is a list of recommended cutting equipment for Chainsaws Husqvarna 545, 545 TrioBrake, 550XP, 550XP TrioBrake, 550XPG and 550XPG TrioBrake. The combinations of powerhead, guide bar and saw chain meet all requirements outlined in the CSA
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide bars of the same length, all
A hard nose bar having the same length and nose radius as a
We recommend that you as replacement use the listed bars and chains or ”Type C
The following cutting attachments are approved for the models Husqvarna 545, 545 TrioBrake, 550XP, 550XP TrioBrake, 550XPG and 550XPG TrioBrake.
|
| Guide bar |
|
| Saw chain | ||
|
|
|
|
|
|
|
|
Length, inch | Pitch, inch |
| Gauge, inch | Max. nose | Type |
| Drive link |
| radius |
| count | ||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
13 |
|
|
|
|
|
| 56 |
|
|
|
|
|
|
|
|
15 | 0.325 |
| 0.050 | 10T | Husqvarna H30 | 64 | |
|
|
| |||||
16 |
| 66 | |||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
18 |
|
|
|
|
|
| 72 |
|
|
|
|
|
|
|
|
13 |
|
|
|
|
|
| 56 |
|
|
|
|
|
|
|
|
15 |
|
|
| 10T |
|
| 64 |
|
|
|
|
|
|
| |
16 | 0.325 |
| 0.058 | Husqvarna H25 | 66 | ||
|
| ||||||
|
|
|
|
|
|
|
|
18 |
|
|
|
|
|
| 72 |
|
|
|
|
|
|
|
|
20 |
|
|
| 12T |
|
| 78/80 |
|
|
|
|
|
|
|
|
Note: For guide bars with nominal length 20”, two different drive link counts exist. Always check information on the guide bar to get the correct drive link count for a spare saw chain.
Saw chain filing and file gauges
Note: For the chains above you are free to choose between 0.050" and 0.058" gauge drive link for the corresponding bar, see the table below.
0.050"/1,3 mm | H30 | H22 |
|
|
|
0.058"/1,5 mm | - | H25 |
|
|
|
English – 39
