ASSEMBLY
Filling with oil
•Open the cap on top of the bar head
•Fill with Husqvarna saw chain oil.
•Refit the cap.
Assembling and dismantling the two-piece shaft
(327P5)
Assembly:
•Loosen the coupling by turning the knob.
•Align the tab of the attachment (A) with the arrow on the coupling (B).
B
A
•Push the attachment into the coupling until the attachment snaps into place.
•Before using the unit, tighten the knob securely.
Dismantling:
Loosen the coupling by turning the knob (at least 3 times).
•Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling.
C 
Fitting the impact guard
(327P5)
If the machine has a protective guard bolted under the engine this should be removed before the impact guard is assembled.
Fit the guard using the three screws and washers. Fit the two short screws in hole A. Tighten the screws to a torque
16 – English
