Husqvarna CT20 Operation, Know Your Cultivator, Eye Protection, Compression Release − Before each

Models: CT20

1 30
Download 30 pages 17.47 Kb
Page 12
Image 12
OPERATION

OPERATION

KNOW YOUR CULTIVATOR

READ THE OWNER’S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the cultivator. To familiarize yourself with the location of the controls, compare the illustrations with your cultivator. Save this manual for future reference.

ON / OFF

Recoil Starter Handle

 

Switch

 

Throttle Control

Lever

Upper Handle

Lower Handle

Compression Choke Control

 

 

Release

Air Cleaner

 

 

Depth Stake and

Fuel Cap

 

 

Transport Wheels

 

 

Assembly

Tine Shield

 

KNOW YOUR CULTIVATOR Tines

Figure 6

Throttle Control − Controls the engine speed and the tine rotation. The cultivator is equipped with a centrifugal clutch that en- gages the tine drive system when the engine speed is increased.

Choke Control Lever − Use to assist

when starting a cold engine.

Recoil Starter Handle − The engine is

equipped with an easy pull recoil starter.

Compression Release − Before each

pull of the recoil starter handle, push the compression release.

Depth Stake − Mount with the wheels up to adjust the depth of cut. Also use to help control the direction and speed of the

ON / OFF Switch − The ON position al-

cultivator.

lows the engine to start. The OFF position

Transport Wheels − Mount with the

stops the engine and keeps the engine from

wheels down when transporting the cultiva-

starting.

tor.

 

 

 

 

EYE PROTECTION

Always wear safety glasses. If you wear eye glasses, put a Wide Vision Safety Mask over your eye glasses.

WARNING: Debris thrown from the cultivator can result in for- eign objects being thrown into

the eyes, which can cause severe eye damage. Always wear safety glasses or eye shields when operating the cultiva- tor.

MS−3615MA

12

Page 12
Image 12
Husqvarna CT20 manual Operation, Know Your Cultivator, Eye Protection, Choke Control Lever − Use to assist