SAFETY INSTRUCTIONS
General safety precautions
WARNING! Read all safety warnings and all
!instructions. Failure to follow the warnings and instructions may result in electrtic shock, fire and/or serious injury.
Work area safety
•Keep work area clean and well lit. Cluttered or dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
•People and animals can distract you causing you to lose control of the machine. For this reason, always remain concentrated and focused on the task.
•Do not use the machine in bad weather, such as dense fog, heavy rain, strong wind, intense cold, etc. Working in bad weather is tiring and can lead to dangerous conditions, e.g. slippery surfaces.
•Never start to work with the machine before the working area is clear and you have a firm foothold. Look out for any obstacles with unexpected movement. Ensure that no material can become loose and fall, causing injury when operating the machine.
•Always check the rear side of the surface where the drill bit will emerge when drilling right through. Secure and cordon off the area and make sure that no one can be injured or material damaged.
Electrical safety
WARNING! There is always a risk of shocks
!from electrically powered machines. Avoid unfavourable weather conditions and body contact with lightning conductors and metal objects. Always follow the instructions in the Operator’s manual to avoid damage.
WARNING! Do not wash the machine with
!water, as water can enter the electrical system or the engine and cause damage to the machine or short circuit.
•The machine should be connected to an earthed outlet socket.
•Check that the mains voltage corresponds with that stated on the rating plate on the machine.
•Check that the cord and extension cord are intact and in good condition. Use an extension cord intended for outdoor use.
•Never use the machine if any cable or plug is damaged, but hand it in to an authorized service workshop for repair.
•Do not use an extension cord while it is rolled up to avoid overheating.
•Never carry the machine by means of the cord and never pull out the plug by pulling the cord.
•Keep all cords and extension cords away from water, oil and sharp edges. Make sure the cord is not pinched in doors, fences or the like. Otherwise it can cause the object to become live.
•The water system cools the drill bit with clean water. The power tool should not be exposed to more moisture than what is provided by the water system. Make sure that no drill slurry enters the machine.
•Do not expose the power tool to rain. Water entering a power tool will increase the risk of electric shock.
•Ensure the cord is behind you when you start to use the machine so that the cord will not be damaged.
WARNING! The machine (Great Britain 120V)
!is not equipped with a ground fault circuit interrupter. The machine must always be used with an isolating transformer for protection in case an electrical fault should occur.
Personal safety
•Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.
•Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your
•Prevent unintentional starting. Ensure the switch is in the
•Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
•Never allow anyone else to use the machine without first ensuring that they have understood the contents of the operator’s manual.
•Be careful as clothing, long hair, and jewellery can get caught in moving parts.
•Remain at a distance from the drill bit when the motor is running.
•Make sure that no pipes or electrical cables are routed in the area to be drilled.
•Never leave the machine unsupervised with the motor running.
•Always unplug the machine during longer work breaks.
•Never work alone, always ensure there is another person close at hand. Apart from being able to receive help to assemble the machine, you can also get help if an accident should occur.
English – 7
