Husqvarna EZC4824BF / 966047501 manual Weak Battery, Connect one end of the Black cable to

Models: EZC4824BF / 966047501 EZ5224 / 966038301 EZ4824K / 966038201 EZ5224BF / 966495901

1 68
Download 68 pages 19.88 Kb
Page 28
Image 28

operation

Weak Battery

WARNING!

 

Lead-acid batteries generate

 

explosive gases. Keep sparks, flame

 

and smoking materials away from

 

batteries. Always wear eye protection

 

when around batteries.

 

IMPORTANT INFORMATION

 

Your mower is equipped with a 12-volt

 

negative grounded system. The other vehicle

 

must also be a 12-volt negative grounded

 

system. Do not use your mower to start other

 

vehicles.

 

If your battery is too weak to start the engine, it should

 

be recharged. (See “Battery” in the Maintenance

 

Section.)

 

If “jumper cables” are used for emergency starting,

 

follow this procedure:

 

Jumper Cables

 

• Connect each end of the RED cable to the

 

POSITIVE (+) terminal on each battery, taking

 

care not to short against chassis.

8011-642

• Connect one end of the BLACK cable to the

Jumper cable connection

 

NEGATIVE (-) terminal of the fully charged battery.

 

• Connect the other end of the BLACK cable to a

 

good CHASSIS GROUND on the mower with the

 

discharged battery, away from the fuel tank and

 

battery.

 

To remove cables, reverse order

Remove BLACK cable first from chassis and then from the fully charged battery.

Remove RED cable last from both batteries.

28

Page 28
Image 28
Husqvarna EZC4824BF / 966047501, EZ5224BF / 966495901 manual Weak Battery, Connect one end of the Black cable to