Husqvarna EZ5224BF / 966495901, EZC4824BF / 966047501 Manual Transport, ZT-2800 Bypass Linkages

operation

Manual Transport

ZT-2800 Bypass Linkages

When pushing or pulling the mower, engage the ZT-2800 (Integrated Zero turn Transaxle) bypass linkages. The ZT-2800 bypass linkages are located on the rear of the frame, below the rear engine guard.

1.Raise the deck into the highest cutting position.

2.Pull the ZT-2800 bypass linkages up and out of the keyhole slots. Release the levers with the head outside the frame and held in the bypass position.

3.To re-engage the ZT-2800 to drive, reverse the above procedure.

Load the machine into truck or trailer by driving up ramps in low gear. DO NOT LIFT! The machine is not intended to be lifted by hand.

8058-032

ZT-2800 engaged

WARNING!

Make no adjustments without:

•the engine stopped,

•the ignition key removed,

•the parking brake activated

8058-033

Bypass linkage, ZT-2800 locked in the bypass position

33