ASSEMBLY

Centre the metal cup (P) on the drive disc’s blade guide.

Turn the output shaft until one of the holes in the drive disk aligns with the corresponding hole in the gear housing.

Insert the locking pin (C) in the hole to lock the shaft.

Position the blade (D) with the drive disk (B). Make sure that the blade is centered by fitting it to the guide on the drive disk.

Fit the support flange (F) on the output shaft so that it rests against the blade.

Fitting the blade guard and saw blade

The blade guard (A) is fitted using 4 screws (L) as shown.

L

A

D

N

E

F

P

BA C

CAUTION! Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data.

• Fit the drive disc (B) on the output shaft.

Turn the blade shaft until one of the holes in the drive

 

disc aligns with the corresponding hole in the gear

 

housing.

Insert the locking pin (C) in the hole to lock the shaft.

ML

Screw the support cup (E) onto the output shaft threads (CAUTION! Left-hand thread). Tighten to a torque of 35-50 Nm (3.5-5.0 kpm). Use the socket spanner in the tool kit. Note that the locking pin (C) must remain inside the gear housing to lock the drive disk. Hold the shaft of the socket spanner as close to the blade guard/combination guard as possible.

!

WARNING! Tighten the lock screw (N) in

the center hole of the support cup.

 

 

Tighten to a torque of 35-50 Nm (3.5-5.0

 

kpm), CAUTION! Left-hand thread. If the

 

lock screw is not fitted in the support

 

cup, there is a risk that the support cup

 

will come unscrewed. This means that

 

the blade will also come loose, which

 

could result in serious or fatal injury to

 

the operator or others.

• Place the blade (D) and support flange (F) on the

output shaft.

G

F

D

B

C

Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade.You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket

English 17

Page 17
Image 17
Husqvarna FC2145W, FC2145S, CC2145, BC2145 manual Fitting the blade guard and saw blade

FC2145W, BC2145, CC2145, FC2145S, FC2145 specifications

The Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W are part of a premium range of outdoor power equipment designed to cater to the diverse needs of landscaping, gardening, and recreational tasks. Each model showcases Husqvarna's dedication to innovation, durability, and user-friendly operation while ensuring high performance and efficiency.

The FC2145 series, which includes both the FC2145 and FC2145S, is primarily designed for advanced grass cutting and trimming tasks. The models are equipped with a powerful engine that provides optimal torque and energy efficiency. The ergonomic design of the handles ensures comfort during extended use, reducing fatigue. One notable feature is the lightweight construction, making them easy to maneuver around various terrains and obstacles.

In contrast, the CC2145 model is tailored for concrete and construction work. This robust machine boasts a high-torque engine and a durable chassis, ensuring it can withstand demanding job sites. Its advanced vibration dampening system minimizes user fatigue, enhancing overall productivity. Additionally, the CC2145 incorporates easy-to-use controls, making it accessible for both professionals and DIY enthusiasts.

The BC2145 is a versatile brush cutter that excels in clearing dense vegetation and underbrush. This model is known for its powerful performance and features a dual cutting system that enhances cutting efficiency. Its adjustable loop handle allows for optimal control, especially when working in tight spaces. The BC2145 also comes with a variety of cutting attachments, enabling the user to adapt to different landscaping needs seamlessly.

Lastly, the FC2145W is designed for more specialized applications, offering a dedicated approach to weed control and maintenance. This model features advanced technology that allows for precision cutting, minimizing damage to adjacent plants. Its water-resistant design enhances durability in various weather conditions, making it ideal for both professional landscapers and homeowners.

In conclusion, the Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W models represent the brand's commitment to quality and innovation. Each model brings unique characteristics and technologies that cater to various outdoor needs, ensuring users can achieve their landscaping goals efficiently and effectively. Their blend of power, comfort, and versatility makes them indispensable tools for anyone serious about outdoor maintenance and care.