MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s Manual. More extensive work must be carried out by an authorized service workshop.

Maintenance

Daily

Weekly

Monthly

maintenance

maintenance

maintenance

 

 

 

 

 

Clean the outside of the machine.

X

 

 

 

 

 

 

Check that the harness is not damaged.

X

 

 

 

 

 

 

Make sure the throttle trigger lock and the throttle function correctly

X

 

 

from a safety point of view.

 

 

 

 

 

 

 

 

 

Check that the handle and handlebar are undamaged and secured

X

 

 

correctly.

 

 

 

 

 

 

 

 

 

Check that the stop switch works correctly.

X

 

 

 

 

 

 

Check that the cutting attachment does not rotate at idle.

X

 

 

 

 

 

 

Clean the air filter. Replace if necessary.

X

 

 

 

 

 

 

Check that the guard is undamaged and not cracked. Replace the

X

 

 

guard if it has been exposed to impact or is cracked.

 

 

 

 

 

 

 

 

 

Check that the blade is correctly centred, is sharp, and is not cracked.

 

 

 

An off-centre blade will cause vibration that could result in damage to

X

 

 

the machine.

 

 

 

 

 

 

 

Check that the trimmer head is undamaged and not cracked. Replace

X

 

 

the trimmer head if necessary.

 

 

 

 

 

 

 

 

 

Check that the locking nut of the cutting equipment is tighten correctly.

X

 

 

 

 

 

 

Check that the locking screw is tightened when using a support cup

X

 

 

with bearings.

 

 

 

 

 

 

 

 

 

Check that the transport guard for the blade is intact and that it can be

X

 

 

secured correctly.

 

 

 

 

 

 

 

 

 

Check that nuts and screws are tight.

X

 

 

 

 

 

 

Check that there are no fuel leaks from the engine, tank or fuel lines.

X

 

 

 

 

 

 

Check the starter and starter cord.

 

X

 

 

 

 

 

Check that the vibration damping elements are not damaged.

 

X

 

 

 

 

 

Clean the outside of the spark plug. Remove it and check the electrode

 

 

 

gap. Adjust the gap to 0.5 mm or replace the spark plug. Check that the

 

X

 

spark plug is fitted with a suppressor.

 

 

 

 

 

 

 

Clean the machine’s cooling system.

 

X

 

 

 

 

 

Clean or replace the spark arrestor mesh on the muffler (only applies

 

X

 

to mufflers without a catalytic converter).

 

 

 

 

 

 

 

 

 

Clean the outside of the carburettor and the space around it.

 

X

 

 

 

 

 

Check that the bevel gear is filled three-quarters full with lubricant. Fill

 

X

 

if necessary using special grease.

 

 

 

 

 

 

 

 

 

Check that the safety release on the harness is not damaged and

 

 

X

works.

 

 

 

 

 

 

 

 

 

Check the fuel filter from contamination and the fuel hose from cracks

 

 

X

or other defects. Replace if necessary.

 

 

 

 

 

 

 

 

 

Check all cables and connections.

 

 

X

 

 

 

 

Check the clutch, clutch springs and the clutch drum for wear. Replace

 

 

X

if necessary by an autorized service workshop.

 

 

 

 

 

 

 

 

 

Replace the spark plug. Check that the spark plug is fitted with a

 

 

X

suppressor.

 

 

 

 

 

 

 

 

 

Check and clean the spark arrestor mesh on the muffler (only applies

 

 

X

to mufflers fitted with a catalytic converter).

 

 

 

 

 

 

 

 

 

Lubricate the drive shaft with the special grease.

Do this every three months.

 

 

 

 

 

Replace the vibration damping elements after each season, however,

 

 

 

at least once a year.

 

 

 

 

 

 

 

English – 33

Page 32 Page 34
Page 33
Image 33
Husqvarna CC2145, FC2145W, FC2145S, BC2145 manual Maintenance schedule, Maintenance Daily Weekly Monthly
Page 32 Page 34

FC2145W, BC2145, CC2145, FC2145S, FC2145 specifications

The Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W are part of a premium range of outdoor power equipment designed to cater to the diverse needs of landscaping, gardening, and recreational tasks. Each model showcases Husqvarna's dedication to innovation, durability, and user-friendly operation while ensuring high performance and efficiency.

The FC2145 series, which includes both the FC2145 and FC2145S, is primarily designed for advanced grass cutting and trimming tasks. The models are equipped with a powerful engine that provides optimal torque and energy efficiency. The ergonomic design of the handles ensures comfort during extended use, reducing fatigue. One notable feature is the lightweight construction, making them easy to maneuver around various terrains and obstacles.

In contrast, the CC2145 model is tailored for concrete and construction work. This robust machine boasts a high-torque engine and a durable chassis, ensuring it can withstand demanding job sites. Its advanced vibration dampening system minimizes user fatigue, enhancing overall productivity. Additionally, the CC2145 incorporates easy-to-use controls, making it accessible for both professionals and DIY enthusiasts.

The BC2145 is a versatile brush cutter that excels in clearing dense vegetation and underbrush. This model is known for its powerful performance and features a dual cutting system that enhances cutting efficiency. Its adjustable loop handle allows for optimal control, especially when working in tight spaces. The BC2145 also comes with a variety of cutting attachments, enabling the user to adapt to different landscaping needs seamlessly.

Lastly, the FC2145W is designed for more specialized applications, offering a dedicated approach to weed control and maintenance. This model features advanced technology that allows for precision cutting, minimizing damage to adjacent plants. Its water-resistant design enhances durability in various weather conditions, making it ideal for both professional landscapers and homeowners.

In conclusion, the Husqvarna FC2145, FC2145S, CC2145, BC2145, and FC2145W models represent the brand's commitment to quality and innovation. Each model brings unique characteristics and technologies that cater to various outdoor needs, ensuring users can achieve their landscaping goals efficiently and effectively. Their blend of power, comfort, and versatility makes them indispensable tools for anyone serious about outdoor maintenance and care.
Top Page Image Contents