Husqvarna GTH26K54 Cleaning, Muffler, Spark Plugs, IN-LINE FUEL FILTER See Fig, Maintenance

Models: GTH26K54

1 44
Download 44 pages 23.9 Kb
Page 20
Image 20
MUFFLER

MAINTENANCE

MUFFLER

Inspect and replace corroded muffl er and spark arrester (if equipped) as it could create a fi re hazard and/or dam- age.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs fi rst. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 26)

The fuel fi lter should be replaced once each season. If fuel

lter becomes clogged, obstructing fuel fl ow to carburetor, replacement is required.

• With engine cool, remove fi lter and plug fuel line sec- tions.

• Place new fuel fi lter in position in fuel line with arrow pointing towards carburetor.

• Be sure there are no fuel line leaks and clamps are properly positioned.

• Immediately wipe up any spilled gasoline.

CLAMP

FUEL FILTER

FIG. 26

CLEANING

Clean engine, battery, seat, fi nish, etc. of all foreign matter.

Keep fi nished surfaces and wheels free of all gasoline, oil, etc.

Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

20

Page 20
Image 20
Husqvarna GTH26K54 owner manual Cleaning, Muffler, Spark Plugs, IN-LINE FUEL FILTER See Fig, Maintenance