Box 2 Inventory: (Figure 4)

Qty

Y. Left Cabinet Stand

1

Y

Figure 4. Box 2 inventory.

 

Box 3 Inventory: (Figure 5)

Qty

Z. Right Cabinet Stand

1

Z

Figure 5. Box 3 inventory.

SUFFOCATION HAZARD!

Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.

G9249  12" x 37" Belt Drive Gap Bed Lathe

Clean Up

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser shown in Figure 6. For thorough cleaning, some parts must be removed. For opti- mum performance from your machine, clean all moving parts or sliding contact surfaces. Avoid chlorine-based solvents, such as acetone or brake parts cleaner that may damage painted surfaces. Always follow the manufacturer’s instruc- tions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G2544—Solvent Cleaner & Degreaser

A great product for removing the waxy shipping grease from your machine during clean up.

Figure 6. Cleaner/degreaser available from

Grizzly.

-13-

Page 15
Image 15
Grizzly G9249 owner manual Clean Up, Box 2 Inventory Figure Qty Left Cabinet Stand