Grizzly G9249 owner manual Tailstock Info

Main Specifications:
Operation Info
Swing Over Bed	12 in.
Dist Between Centers	37 in.
Swing Over Cross Slide	6-3/4 in.
Swing Over Saddle	6-1/2 in.
Swing Over Gap	18-7/8 in.
Max Tool Bit Size	5/8 in.
Compound Travel	3-1/2 in.
Carriage Travel	31-1/2 in.
Cross Slide Travel	6 in.
Headstock Info
Spindle Bore	1-7/16 in.
Spindle Size	2-1/4 in.
Spindle Taper	MT#5
Spindle Threads	8
No Of Spindle Speeds	12
Range Of Spindle Speeds	50 - 1200 RPM
Spindle Type	Threaded
Spindle Bearings	Tapered Roller
Tailstock Info
Tailstock Travel	3 in.
Tailstock Taper	MT#3
Tailstock Barrel Diameter	1-1/4 in.
Threading Info
No Of Inch Threads	50
Range Of Inch Threads	4 - 112 TPI
Range Of Longitudinal Feeds	0.0047 - 0.0165 in.
No Of Longitudinal Feeds	16
No Of Cross Feeds	16
Range Of Cross Feeds	0.0023 - 0.0082 in./rev.
No Of Metric Threads	24
Range Of Metric Threads	0.25 - 7.5 mm
Dimensions
Bed Width	7-1/8 in.
Leadscrew TPI	8
Leadscrew Length	45 in.
Faceplate Size	10 in.
Leadscrew Diameter	7/8 in.
Feed Rod Diameter	3/4 in.
Floor To Center Height	44-1/2 in.
Construction
Base Construction	Cast Iron
Headstock Construction	Cast Iron
Headstock Gears Construction	Cast Iron
Bed Construction	Induction Hardened Cast Iron
Body Construction	Cast Iron
Stand Construction	Formed Steel
Paint	Epoxy
Other
Kilowatt Output	1.119

G9249  12" x 37" Belt Drive Gap Bed Lathe -5-