Husqvarna H346SG owner manual Assembly, REAR DRAWBAR See Fig, SUPPORT ASSEMBLY See Fig

ASSEMBLY

1	HANG SUPPORT ASSEMBLY ON
	REAR DRAWBAR (See Fig. 1)

1.Slide flanges of support assembly into drawbar slots first, then, pivot backwards inserting pin into drawbar pin hole.

2.Be sure support assembly is seated properly, then secure with retainer spring.

SUPPORT

2	MOUNTING COVER ASSEMBLY TO
	SUPPORT ASSEMBLY (See Fig. 2)

NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover assembly to tractor.

1.Position cover assembly on ground behind tractor.

2.Lift and rotate cover to align cover brackets with support assembly tubes.

3.Slide cover assembly down onto the support tubes.

ASSEMBLY

DRAWBAR SLOTS

INSERT

FLANGES

FIRST INTO

DRAWBAR

SLOTS

PIN

DRAWBAR

PIN HOLERETAINER SPRING

FIG. 1

COVER ASSEMBLY

SUPPORT

ASSEMBLY

03024

FIG. 2

5