ASSEMBLY
1 BAGGER SUPPORT ASSEMBLY (See Fig. 1)
1.Remove and discard the upper bolt on both sides of the drawbar. Using the same holes, install the shoulder bolts supplied and tighten securely.
2.Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts.
3.Be sure support assembly is seated properly and secure with retainer spring supplied.
REMOVE AND DISCARD
UPPER BOLTS AND INSTALL
SHOULDER BOLTS SUPPLIED
SUPPORT
ASSEMBLY
3064
PINDRAWBAR
RETAINER SPRING
2 | MOUNTING COVER ASSEMBLY TO |
SUPPORT ASSEMBLY (See Fig. 2) |
NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting cover as- sembly to tractor.
1.Lift cover and align cover brackets with support assembly tubes.
2.Slide cover assembly down onto the support tubes.
COVER SUPPORT
ASSEMBLY ASSEMBLY
FIG. 2
FIG. 1
5