Husqvarna H346SL owner manual UPPER CHUTE See Figs. 5A and 5B, Level Mower

Models: H346SL

1 11

Page 7

1.Lower mower to its lowest cutting position.

2.Assemble upper chute by inserting curved end into hole in back of cover.

TIP: Holding upper chute as shown and twisting while installing in cover will help keep the rubber seal in place.

NOTE: Handle carefully so as not to damage full bag indi- cator.

COVER	UPPER
	CHUTE

3.Push in and turn upper chute until it is in line with lower chute.

4.Align the bosses on lower chute with alignment slots on upper chute and slide together.

5.Secure with rubber latch by hooking hole in latch over latch pin.

FULL BAG

COVERINDICATOR

UPPER

CHUTE

HANDLE

LATCH PIN

RUBBER

LATCH

LOWER

CHUTE

ALIGN-

MENT

SLOT

BOSSES

•Be sure mower is properly leveled for best mower performance. See your tractors owner's manual for instructions

Image 7

Contents

Grass Catcher Assembly Operation Customer ResponsibilitiesRepair Parts Product No. 960 73 MFG. ID. No. 46 Inch MowerII. SLOPE OPERATION SAFETY RULESSafe Operation Practices for Ride-OnMowers I. GENERAL OPERATIONSAFETY RULES TABLE OF CONTENTSV. SERVICE IV. TOWINGUNPACKING INSTRUCTIONS TOOLS REQUIRED FOR ASSEMBLYCARTON CONTENTS KNOW YOUR GRASS CATCHERMOUNTING COVER ASSEMBLY TO 1 BAGGER SUPPORT ASSEMBLY See FigSUPPORT ASSEMBLY See Fig ASSEMBLYLOWER CHUTE - MOWER WITH 3 CONTAINER MOUNTING See FigMOUNTING TAB See Fig FIG. 6B 5 UPPER CHUTE See Figs. 5A and 5B6 LEVEL MOWER FIG. 6ATIPS FOR IMPROVED BAGGING OPERATION OPERATIONBLADE CARE CUSTOMER RESPONSIBILITIESGENERAL RECOMMENDATIONS STORAGEREPAIR PARTS SECTION 5: CUSTOMER RESPONSIBILITIES WARRANTY STATEMENTSECTION 1 LIMITED WARRANTY SECTION 4: EXCEPTIONS AND LIMITATIONS