Husqvarna H346SL CONTAINER MOUNTING See Fig, Lower Chute - Mower With, MOUNTING TAB See Fig

3 CONTAINER MOUNTING (See Fig. 3)

1.Install one container to left side first. Install another container to center position and one in right position.

NOTE: Left edge of right container should always overlap right edge of left container at center supports.

2.Close cover and lock latches over center support tubes. To lock and release latches, pull back on latch handles.

COVER LATCH

HANDLES

CENTER

SUPPORT

TUBES

CONTAINER

HANDLE

FIG. 3

DEFLECTOR SHIELD

REAR LATCH

4	LOWER CHUTE - MOWER WITH
	MOUNTING TAB (See Fig. 4)

1.Raise and hold deflector shield in upright position.

2.Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as shown.

3.Hook rear latch into flange hole on back of mower.

4.Hook front latch into flange hole on front of mower.

CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.

DEFLECTOR SHIELD

HINGE BRACKET

MOUNTING

TAB

FRONT LATCH

FIG. 4

6