STARTING AND STOPPING
Check before starting
•Inspect the working area. Remove any objects that could be thrown out.
•Check the cutting attachment. Never use blades that are dull, cracked or damaged.
A
B
•Check that the machine is in perfect working order. Check that all nuts and screws are tight.
•Check that the blade guard is not damaged or distorted. (HA 110)
•Replace the blade guard if it is bent or damaged. (HA 110)
•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.
•Check that the cutting attachment always stops when the engine is idling.
•Only use the machine for the purpose it was intended for.
•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.
10 – English
